433MHz Wireless e Control Switch AC110V 220V 10A 1CH Relay Module Receiver ON OFF e Control For Led Lights DIY

• Working voltage : AC 85V~250V

• Input/Output : 1V~250V

• Max current : 10A

• Max load: 2200W

• RF frequency : 433Mhz

• Pin : L \ N

• Receiver size : 31*54*17mm

• Working temperature : -30~+80 Celsius

• Receiving Sensitivity : >97dbm

• Amount of storage e controls : 20 pieces

• Support en : 1527 Learning code /2262 fixed code

• RF Operating mode : ASK rheterodyne wireless reception

• Receiving range : Open space is more than 50 meters

• e operating mode : Momentary Mode / Tole Mode / Latched Mode

Working Modes
You can set up in 3 modes: Momentary mode,Tole mode and Latched mode.
Momentary mode:
Press and hold A on,this relay will work;Release A on,this relay will stop.
Tole mode:
Press A on,the relay will work;press A on again,this relay will stop.
Latched mode:
Press A on,the relay will work;press B on again,this relay will stop,second relay will work.
How to Set up
Momentary mode:
Press learning on once,press A on once,succeed.
Tole mode:
Press learning on twice,press A on once,succeed.
Latched mode:
Press learning on 3times,press A on once,succeed.
Clean data:
Press learning on 8times,the data will be cleaned.All cannot control this receiver.
If u want to change modes,u need to clean the data first.