433Mhz RF e Control Wireless Switch DC 5V 12V 24V 1CH rf Relay Receiver and 2CH nsmitter For Door Electroic lock

433Mhz RF e Control Wireless Switch DC 5V 12V 24V 1CH rf Relay Receiver and 2CH nsmitter For Door Electroic lock

• Working voltage : DC5V/6V/12V/24V/30V

• Input/Output : 1V~250V

• Max current : 10A

• Max load: 300W

• RF frequency : 433Mhz

• Pin : COM/NC/NO

• Receiver size : 30*35mm

• Working temperature : -30~+80 Celsius

• Receiving Sensitivity : >97dbm

• Amount of storage e controls : 20 pieces

• Support en : 1527 Learning code /2262 fixed code

• RF Operating mode : ASK rheterodyne wireless reception

• Receiving range : Open space is more than 50 meters

• e operating mode : Momentary Mode / Tole Mode / Latched Mode / Delay Mode

Working Modes: 4 modes
Momentary mode,Tole mode,Latched mode and Time delay mode

Momentary mode: Press and hold A on, will work;Release A on,will stop. 
Tole mode: Press A on,will work;press A on again,will stop;
Press B on,will work;press B on again,will stop.
Latched mode: Press A on,will work;Press B on again,will stop.
Time delay mode:  Press and hold on on "A" , turn on;  
Release the on, turn off after 5 secondsor 10/15 seconds

How to program
Momentary mode: Press learning on once,press A on once,succeed.
Tole mode: Press learning on twice,press A on once,Press B on,succeed.
Latched mode: Press learning on 3times,press A on once;press the B on once.succeed.
Time delay mode: Press learning on 4/5/6 times,press A on once,succeed.

Reset:
Press the learning on 8 times. The existing data will be deleted succeed.