Water Testing Meter 6 In 1 PH EC TDS ORP TEMP Residual Chlorine Water Tester Pen for Swimming Pool

The data is displayed synchronously. Just dip the electrode into the solution to be tested, and the data will be synchronized to the mobile phone APP. Multiple data are displayed at the same time, which is convenient and fast.No need to operate the water quality pen frequently to view data
Support Bluetooth control, mobile phone full-screen multi-parameter simultaneous display, mobile phone case control backlight display
You can set the maximum and minimum measurement values by yourself. Set the PH/EC/ORP high or low limit value according to user needs. If the test result is higher or lower than the range value, the value will be displayed in red.
IP67 is an international waterproof certification that prevents water penetration and is suitable for short-term soaking
Data is automatically stored and shared.Data can be automatically saved and manually saved, the saved data can be exported to Excel tables, and can also be shared with your friends
Product parameters

Product size: 160*80*80MM

Battery: 3* AAA 1.5V battery (shipped without battery)

pH
Range 0.1-14.0pH
Resolution 0.1pH
Range ±0.1pH
CL
Range 0.1-4.0mg/L
Resolution 0.1mg/L
EC
Range 0-1999µS/cm; 2000-10000µS/cm
10.01-20.0mS/CM
Resolution 1µS/cm; 10µS/cm; 0.01mS/cm；
Accuracy ±2%F.S
TDS
Range 0-999ppm; 1000-9990ppm；
Resolution 1 ppm; 10ppm；
Accuracy ±2%F.S
ORP
Range: -1200~+1200m
Resolution 1mV
Accuracy 15mV
TEMP
Range 0.1°C-80.0°C; 32.1°F-176°F
Resolution 0.1°C; 0.1°F
Accuracy ±0.5℃
Calibration (You can view the calibration record)
PH：6.8/4.0/9.2 or 7.0/4.0/10.0
EC/TDS 1413μS/cm；12.88 mS/cm；111.8mS/cm
ORP 256mV
ATC temperature 0.1°C-60.0°C
Ambient temperature 0.1°C-80.0C relative humidity: maximum 90%
TDS coefficient 0.1-3.0 (factory default value 0.5)
EC temperature compensation 0.1-3.0%/°C (factory default value is 2.0%/°C)
Bluetooth: Mobile Bluetooth supports version 5.2

Backlight: with backlight, support mobile control

data
Save save as Excel worksheet
Print support
Waterproof: IP67

Data storage: the last 1000 pieces of data

Suitable for: drinking water, aquariums, laboratories, swimming pools, fish tanks, irrigation, etc.

Operation instructions

APP control water quality meter, LCD screen backlit/not backlit 1.Scan the QR CODE to download the APP. 2.Install three AAA 1.5V batteries and press "ON/OFF" to turn on the meter.(Without battery) 3. Put the electrode into the test solution and wait for the test to stabilize. Press the "MODE" button to convert CL, ORP, EC, TDS, and pH modes. Press "HOLD/TEMP" to keep the test. Press and hold the “HOLD/TEMP” button to switch the temperature between °C and°F，

Packing list

Water quality tester*1, manual*1