Universal 433MHz Wireless 4 Keys Copy Cloning Garage Door Remote Control Duplicator Key

Type: Wireless remote
Frequency: 433 MHz
Use: Universal
Use: Electric Door
Wireless Communication: RF
Model Number: 4 Keys Copy Cloning Garage
Package: Yes
Channel: 1F
Support APP: No

Description:
For: Such as electric telescopic door remote control, road gate remote control, alarm remote control, and so on.
Rated voltage: 3V CR2016 Battery(included).
Wireless transmission distance: 50-150 (m). (open space)

Features:
Multi-functional and multi-variable, personalized, and user-friendly simple design and fast to use.
This smart copy remote control is suitable for electric door remote control, telescopic door remotes control, and garage door remote control.

Cloning types:
2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different manufacturers have different prefixes of models, as long as the digital portion of the can be the same model.
Note: We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code remote control, it is not possible to determine whether the remote control is an encryption chip. Therefore, we do not recommend copying the rolling code remote control.

Use steps:
1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED flashes quickly; the two fingers can release; then press any one key of the remote control; when LED goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the is still on, it indicates that the code has not been cleared successfully. You need to re-clear, and only by successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.
2. Copy: left hand taking the remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED will flash quickly 2 times; after one second, the indicator keeps flashing and let go of your fingers; and then press the key after successful study, the keeps on, which means that the first key code on the remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the matching remote control.
3. Restore: When you accidentally clear the copy of the remote control code, you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will flash quickly, and let go after pressing any key, is long, this Indicating that the code for the remote control is restored. Before using our copy remote control, please be sure to remove the existing code from the remote control.
4. How to deal with a situation where some of the keys can control, but the rest cannot control? You can use clear and restore operations, the specific operation is as follows:
(1) first clear code;
(2) after clearing the code, copy the unsuccessful key again, and there is no need to copy the rest buttons;
(3) and then clear the code again;
(4) restore code; at this time, the keys that were not successfully copied are now covered by new codes, and the keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.

Precautions:
1. Select the remote control of the prerequisite: the remote control function is normal, the remote control is the same or compatible, remote control operating frequency is the same.
2. The remote control can only copy the fixed code, learn the code and part of the single-chip remote control (can copy the model see copyable type).
3. Two-way remote control, rolling code remote control, and single-chip encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301, and so on.
4. Before copying the remote control, make sure that the existing code on the remote control has been cleared and check that the code is cleared successfully. Otherwise, it cannot be copied.
5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.

Notes:
1. Please allow 1-3mm differences due to manual measurement.
2. Due to the different displays and different lights, the picture may not show the actual color of the item. Thanks for your understanding.

Package included:
1 * 433MHZ remote control duplicator.

Please confirm The remote control's frequency and model are the same as your remote control and that they can be copy

Step1:Code clear
Hold down Buttons A and B nutil led Flashes
then Release the Button B and Press 3 times

Step2:Copy Code
Place the and clone remotes closer then press the button to program on both remotes hold until the led flashes steadily