TOOLTOP 2in1 Car Signal Generator Multimeter 2.8inch Color

2in1 design, this product ingeniously integrates digital multimeter, and signal source functions in one device. Equipped with a 2.8-inch color display. Multifunctional design, as signal generator can generate sine waves, square waves, combination waves, scanning waves, scanning waves and other waveforms; support coil control and waveform signal storage. As a multimeter, it supports DCVoltage, ACVoltage, resistance, diode, on-off, capacitance, frequency, duty ratio test function. Suitable for accurate car maintenance and audio coordination.、



Features:

【2in1 Design with 2.8 Inch Color Display】: This product ingeniously integrates digital multimeter and signal generator functions into one device. 2.8-inch color display, with 320*480 resolution, and 5%-100% screen brightness adjustable.

【Multimeter Function】: It supports DCVoltage, ACVoltage, resistance, diode, on-off, capacitance, frequency, duty ratio test function. Supports 4000 counts True RMS function.

【Signal Generator】: Built-in waveform signal generator, it can generate sine waves, square waves, combination waves, scanning waves, scanning waves and other waveforms. Support coil control and waveform signal storage.

【Manually Parameters Setting】: Support setting VP-p, time, frequency, voltage output, to meet different testing needs. By manually setting these parameters, the user can better control the testing process to achieve optimal test results.

【Coil Control】: Check if the ignition coil is normal, support ignition coil control, solenoid valves control, relay control (support 30V/1A and below coil control), that means it can be applied to most low voltage equipment testing.

【Scanning Waves Output】: It is equipped with a function to generate analogue crankshaft cam signals from low-speed to high-speed operation. Suitable for audio maintenance and coordination circuit maintenance.

【Combined Waves Output】: Support combined waves output, it can be arbitrarily set missing teethsignal without connecting to the computer. Maximum number of combined waves: 99+99.

【Waveform Signal Storage】: Manually adjusting waveform signal parameters allows for storage and loading. 50 sets of waveform parameters are stored.



Specifications:

Name: Signal Generator Multimeter

Material: plastics

Model: ET31C, ET32C (optional)

Battery: according to your selection

ET31C: 3 * AAA battery (not included)

ET32C: built-in lithium battery (included)

Output voltage: -12 to ﹢12 V

Frequency output: 1Hz to 9999Hz

Maximum combinedwave number: 99+99

Coil control support: Up to 30V/1A

Item size: 134 * 69 * 25mm / 5.28 * 2.72 * 0.98in

Package size: 160 * 100 * 100mm / 6.30 * 3.94 * 3.94in

Package weight: 300g / 10.58ounce



Packing List:

1 * Signal Generator Multimeter

2 * Test Leads

1 * Probe

1 * User Manual