The TAS5630 Class D amplifier can drive a 4 ohm load at DC48V, and can 300W+300W stereo output power.
They use PurePath™ HD technology and TI advanced closed-loop architecture to realize the generation of Blu-ray home theater system, stand-alone home theater, professional High-definition media playback and ultra-low distortion of the .
It is the digital power amplifier with the largest single-chip power at , with extremely low distortion, high resolution, with a fan, and full materials. Parameter :
When DC=50V, R=4Ω, +N=10%, P=300W
When DC=50V, R=6Ω, +N=10%, P=210W
When DC=50V, R=8Ω, +N=10%, P=160W
When DC=50V, R=4Ω, +N=1%, P=240W
When DC=50V, R=6Ω, +N=1%, P=160W
When DC=50V, R=8Ω, +N=1%, P=125W
Size: 91 x 64 x 27mm
Recommended power supply: DC 48v, 600W harmonic distortion (+N): less than 1%
Signal-to-noise (): more than the 100dB
Input impedance: 20KΩ
Output voltage: less than 150mV
Voltage gain: adjustable
Conversion rate (): 50V/us
Frequency response range: 20Hz--20kHz
Power supply range: DC20--DC50V
Colour:blue
Material:pcb Package Contents:
1 * TAS5630 Digital Power Amplifier Board
Note: do not plug or touch the audio input line when the power is on, it will easily burn out the board by high-frequency -excitation, and the board will be shipped after the test is . Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.