(SU)Audio Similarities Isolator Anti-interference Noise Reducer Noise Cullender

Audio Similarities Isolator Anti-interference Noise Reducer Noise Cullender bluetooth receiver Audio Similarities Isolator Anti-interference Noise Reducer Noise Cullender bluetooth receiver

Characteristics: 1. [Remove Beep]: the noise through the floor loop when the audio source and (some car Speakers / home audio systems) use the same power supply, so as to achieve clear music enjoyment, and The wonderful flowers. 2. [pure sound quality]: no music damage, give you a better experience, can be used on mono. 3. [easy to use, just plug and play, no battery]: small and portable, this gadget doesn't take too much Space and it's easy to take away. Unable to the problem of noise: 1. The noise caused by non-common ground, this paragraph cannot be filtered like electromagnetic Faults, etc., will be sure to the source of noise before purchase. 2. Because each person's expectations for isolation are different, the senses are different, some customers Feel good and some customers feel bad. 3. This product is an audio common ground isolator that is effective for the noise caused by the common Floor for the audio source and the receiving device. 4. To put it simply, the floor point of the two electrical devices is not in the same place. Because of the difference In ground resistance, noise is transmitted into the electrical equipment through the ground wire to form it Disorders. Because the points of the two devices are different, it is possible to common ones Floor noise. In the car audio, there is an audio interference, such as the buzzing sound, the frequency of this noise Be with the engine speed. 5. Therefore, this product can the noise and current sound of the common current common product, And can not the noise by other reasons, so you have to the noise source itself. Determine if noise is caused by common ground: 1. Use the headphones to connect to the car MP3 and the car navigation AUx (3.5mm interface). When the sound belongs From the headphones there is no noise at this time, it can be ed that the noise of the car device is caused by the common floor. 2. Use the audio cable to connect the battery-powered cellphone, or MP3 (note that the cellphone and MP3 Are not on any power supply on the car, such as a phone), and connect to the AUx of the car of the center Console, and play the music of the cell phone., It can be ed that the past noise is caused by the common floor. 3, computer, amplifier, audio, CD: use a passive headset into the computer to hear the noise, use the phone Insert into the amplifier, audition audio when you hear the sound, there is no noise, the basic judgment is caused by the Common floor. 4. After starting the car, the installed amplifier has a current sound. In some models, the gas is larger and the current It's louder. This product can solve this problem. 5, there is a current sound between the amplifier and the speaker or the sound, you can install this product between The amplifiers and the speakers. 6. When the laptop is connected to the projector and the amplifier, the noise can be d. You can Connect the adapter to the power supply or use the battery. At this time, pull the amplifiers and disappear, or pull The projector and the noise disappears. Then you can use the headphone jack and amplifier of the computer. Add one Common floor isolator to noise. Package include: 1x Auto Audio Isolator
Label: Yes
Material: Polyester 100%
Washing care: Hand wash Cold,Hang or Line Dry