Solar Simulation Camera Monitoring Light TY11302 SMD

Solar Simulation Camera Monitoring Light
1. Lamp beads: 19 LED/44 SMD + red light
2. Battery: 3.7V 18650 lithium battery 2400MAH, the remote control contains a CR2025 button battery
3. Solar panel: 5.5V polysilicon
4. LED color temperature: 6000-6500K
5. Induction distance: about 3-7m
6. Sensing angle: about 120 degrees
7. Lighting mode:
- Gear 1: human body induction mode, bright light when it is dark, and light off after 20s
- Gear 2: human body induction + micro-bright mode, automatically turn on weak light when it is dark, bright light when coming, and continue to turn on weak light after 20s
- Gear 3: medium light always bright mode, automatically bright medium light when it is dark, no human body sensing mode
8. Material: ABS, electronic components
9. Size: about 20.6x13.1 cm
10. Weight: about 290 grams
Features:
1. Simulate the monitoring light, after the switch is turned on, the red indicator light will keep flashing
2. Intelligent photosensitive system, automatically absorb light during the day to store electricity, and automatically light up at night
3. Sensitive induction probe, about 3-7m fast induction, light up in advance
4. 3 lighting modes, which can be adjusted by remote control
5. Life-grade waterproof, can also be used in rainy days
6. The lamp body can be freely rotated 360 degrees
7. Polycrystalline silicon solar panel, high photoelectric conversion rate, energy saving and power saving