Smart Home 3.0 Wired Multimode Gateway Hub HomeKit Tuya Wireless Bridge Smart Life Voice Control for Siri Google

Smart Home ZigBee 3.0 Wired Multi-mode Gateway Hub HomeKit Tuya Wirele Bridge Smart Life Voice Control for Siri Google

NOTE！Please be sure to read the following description completely before purchasing. Otherwise you are likely to misunderstand the function of the device. Thanks!

None of the three options supports Bluetooth.

HomeKit Wired Version

①Supports both HomeKit and ZigBee protocols.②This device cannot be directly connected to WiFi(Needs to be connected to the network through the Ethernet Port）③This is a dual-purpose gateway, which can be used as a ZigBee Hub to connect with TUYA APP, or as a HomeKit Hub to connect with Home APP.④If you want your Zigbee smart device to connect to Home APP through this Gateway/Hub, you need to e sure your Zigbee smart device supports HomeKit authentication protocol.⑤When using the TUYA APP, Most Zigbee devices can be added to the gateway. (Non-ZigBee protocol smart devices such as TUYA WiFi smart devices cannot acce this ZigBee gateway).⑥When using the Home APP, you can add HomeKit-certified Zigbee devices to the gateway.⑦Only HomeKit certified Zigbee smart devices can be added to the Home APP.Therefore, you cannot connect an uncertified TUYA Zigbee smart device to the Home APP through this HomeKit Hub.⑧When you use Home APP to connect smart devices, you need to e sure that your smart devices are using ZigBee protocol and have been certified by HomeKit, otherwise it will not work, thanks.⑨This gateway is not compatible with the following device: Tuya Zigbee Smart IR Remote (Tuya ZS06), this device requires the Main Module Versin of the gateway must be higher than 1.31.0, and our gateway Main Module Versin is: 1.3.0.⑩Please note: The latest version of the HomeKit APP has been updated. Devices such as gateways and bridges will no longer be displayed on the homepage and the homepage of the default room. You will not see the gateway that has been succefully added to the HomeKit APP in the default room.⑪Non-ZigBee protocol smart devices such as TUYA WiFi smart devices cannot acce this ZigBee gateway.

How to find this Gateway in the Home APP ？

Step 1: Click Home Settings. Step 2: Click Home Hubs & Bridges. Step 3: Click Bedroom NEO Gateway (the gateway you want to find). How to add a sub-device, please refer to the steps of adding a sub-device below. After the gateway is succefully added, there is basically no need to operate in the app, unle you want to delete the gateway, so it is a reasonable arrangement to hide it in the default room. When you need to pair with a smart device, you only need to short pre the black on on the gateway.How to restore factory settings:You can restore factory settings by long preing the black on on the device, but you cannot judge whether the factory settings are succefully restored by factors such as lights. You need to connect the device to TUYA / Smart Life APP first, and then long pre the black on on the device. When you see the gateway disappear from your TUYA / Smart Life APP, you can prove that the factory reset is complete.How to use TUYA / Smart Life APP and Home APP at the same time?If you want to use two APPs at the same time, we recommend to connect Home APP first, and then connect TUYA / Smart Life APP, everything will go smoothly. Conly, when you connect TUYA / Smart Life APP first, then connect Home APP, It will cause the Home APP to fail to connect, and the device cannot be found.

Tuya ZigBee Wired Hub Version

①Does not support HomeKit protocol.②This device cannot be directly connected to WiFi(Needs to be connected to the network through the Ethernet Port).③You can use TUYA APP or Smart Life APP to connect to this gateway, which can connect most ZigBee smart devices to the above two APPs.④Non-ZigBee protocol smart devices such as TUYA WiFi smart devices cannot acce this ZigBee gateway.

Tuya ZigBee Wirele Hub

①Does not support HomeKit protocol.②This device can be directly connected to WiFi(Only supports 2.4Ghz WiFi network, does not support 5Ghz WiFi network).This device does not contain the Ethernet Port(POE).③You can use TUYA APP or Smart Life APP to connect to this gateway, which can connect most ZigBee smart devices to the above two APPs.④Non-ZigBee protocol smart devices such as TUYA WiFi smart devices cannot acce this ZigBee gateway.

Steps to add HomeKit child device(Homekit Acceories):

1.Sub-device additions（1）Long pre the reset on of sub-device to e the sub-device enter the standby state (the indicator lights on).（2）Short pre the gateway reset on to e the gateway enter the sub-device adding state (steady blue, flashing purple).（3) The device will be automatically added to the gateway. After adding, please find the gateway in the APP through the following path (Step 1: Click Home Settings. Step 2: Click Home Hubs & Bridges. Step 3: Click Bedroom NEO Gateway (the gateway you want to find).)2. Sub-device settingsLong pre the sub-device icon to enter Settings3. Remove child deviceSince there is no option to directly remove the sub-device in the HomeKit gateway in the Home APP, it is neceary to remove the sub-device from the TUYA APP, and the Home APP will remove it synchronously. For details, please refer to the demo video. thanks.

Please note: The added gateway will not be displayed in the default room. How to find the added gateway: Step 1: Click Home Settings. Step 2: Click Home Hubs & Bridges. Step 3: Click Bedroom NEO Gateway (the gateway you want to find).