SCULPFUN S30 Pro 10W Laser Module Interchangeable Lens

Features:

Wide Compatibility: With an ingenious and highly compatible structural connection device, S30PRO module can be well adapted to different laser engraving machines, laser cutting machines, DIY 3D printers, milling machines, etc. Compatible with SCULPFUN S9/S6pro/S6, ATOMSTACK A5/A5Pro, ORTUR (12V version) laser engraving machine.

Ultra-fine and high-density 10W laser shaping technology: The laser of S30 Pro is increased to 10W, which is twice that of S9. But getting the same 0.08mm focus ultra-fine laser beam as the S9 means that the S30 Pro has higher energy density, stronger cutting penetration and engraving capabilities.

Powerful High-Speed Air Assist: S30 Pro is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance.

Detachable laser eye shield: Equipped with a detachable eye shield, which will not dazzle even without glasses. Also, if you don't need it, you can easily disassemble it.

Stronger&Cleaner: Combining advanced high-speed air assist and 10W high-energy density laser, many high-density woods such as can be cut; And the cutting surface is cleaner with powerful airflow blows away the residue, free of any stains.

Universal 12V/PWM modulation board: It uses a common 12V/PWM modulation board, which can be adapted to common GRBL or motherboards. See product pictures for details.



Specification:

Module: SCULPFUN S30 Pro Laser module Set

For: laser engraving machines such as SCULPFUN S9/S6pro/S6、ATOMSTACK A5/A5Pro、ORTUR(12V Version), ELEKSMAKER, or DIY 3D printers, machine tools.

Engraving Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, zigzag, cardboard, plastic, leather, board, aluminum oxide, 304 stainless steel, ceramic, dark stone

Cutting Materials: all kinds of wood (including walnut, cherry and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, boards

Laser Output : 10W (light energy)

Inner diameter of Air Pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm)

Laser Wavelength: 455±5nm

Laser Type and Fixed Focus: fixed focus laser, fixed focus through 50mm measuring column

Laser Shell Material: aluminum alloy



Laser circuit board

Circuit Board Size: 40*40mm

Circuit Board:12V/PWM modulation board

Input voltage: 12V

Max Input of laser module:12V 5A

Wire Rod:HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).

Fan:12V 0.15A 4020 fan

Fan speed: 15000 rpm

Operating temperature: -20 ℃ to 70 ℃



Package Weight: 0.6kg/21.1oz

Package Size: 305x150x125mm/12x5.9x4.9in



Note:

How to judge whether the S30 Pro laser is suitable for use? You need to pay attention that the input voltage of the S30 Pro laser is 12V, and the S30 Pro is a 3pin interface, you can check the detailed pictures.



● Because of the powerful laser of S30 Pro, it is forbidden to run the engraving machine unattended. Pause it if you're not around.

● For detailed machine instructions, please refer to the manual for parameter settings.

● When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear .

● Do not touch the laser with your hands, otherwise you may burn your hands.

● Please avoid strong impact on the machine.

● It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.

● Do not use the laser directly on any specular reflection object, which may cause injury to the operator or burn the laser.



Packing List:

1 x 7.5mm inner diameter air tube

1 x acrylic protective cover

1 x S30 Pro Laser head

1 x Multi-function connector

1 x 50mm measuring column

1 x Screw and tool kit