Reptile Fogger Smart Spray System Touchscreen Controller

Features:

【Intelligent Timing and Auto-Cycling】 - This reptile mister system features a smart timer that allows you to set the duration of misting from 1 second to 99 minutes and the interval time from 1 minute to 99 hours. It also comes with a built-in memory function, ensuring that the previous settings are saved even in case of outage.

【Adjustable Spray Nozzle with 360° Rotation】 - Our reptile fogger comes with a fully adjustable spray nozzle that can be rotated 360 degrees, providing a wide coverage area for your reptile tank. You can easily customize the direction and intensity of the mist according to your pet's needs.

【Multiple Modes for Versatile Application】 - This automatic mister offers three different modes: constant-on mode, constant-off mode, and auto-cycling mode. You can choose the mode that best suits your needs, whether it's providing continuous mist or intermittent misting for your reptile's habitat.

【Easy-to-Use Touchscreen Control】 - Equipped with a user-friendly touchscreen control panel, this reptile misting system allows for easy operation and hassle-free adjustments. The intuitive interface makes it simple to set up and customize the misting schedule for your reptile tank.

【Eco-friendly Reservoir and Plant Humidification】: Our automatic mister includes an eco-friendly reservoir that simulates natural rainfall, providing a healthy and humid environment for your plants. By mimicking the natural process of rain, this system helps to keep your reptile's habitat properly hydrated and promotes plant growth. The self-priming water pump eliminates the need for manual priming, making installation quick and hassle-free.



Specification:

Product material: ABS

Product size: Main unit 7.8 x 7.8 x 3.6cm / 3.07 x 3.07 x 1.42in

Water pipe length: 5m / 16.4ft +2 nozzles, 10m / 32.8ft +3 nozzles, 10m / 32.8ft +4 nozzles (Optional)

Product color: Black

Recommended installation spacing: 10-20cm / 3.94-7.87in

Spray duration: 1s-99min

Interval time: 1min-99h

Mode: Normally closed, normally open, automatic cycle

Rated : 3.5W

Work pressure: 4-8bar / 58.02-116.03psi / 400-800KPa

Lift: ≥2m / 6.56ft

Rated current: 1A

Noise: ≤65dB

Rated voltage: 5V



Note:

1. The suction filter head must completely sink below the water surface, otherwise it will leak and cannot absorb incoming water

2. Tighten the pipeline, and the inlet pipe must be firmly inserted into the bottom of the joint. If the water inlet pipe is not tightly inserted and there is air leakage at the inlet, it will cause the water to not be sucked in

3. Different nozzle combinations can have different spraying effects. It is recommended to set the spraying angle and position of the nozzle according to its actual effect

4. When running the machine for the first time, do not connect the main engine's water outlet pipe to the backend pipeline. Wait until the water bubbles are completely discharged and the water is stable before connecting to the backend pipeline



Packing List: (Optional)

5m + 2 Nozzles

1 x Main Unit

5 x Ties

1 x Tube Cutter

1 x Bend Nozzle

1 x Tee Connector

1 x 5m PE Tube

5 x R-shape Clips

2 x End Caps

1 x Filter

2 x Universal Sprayers

1 x Micro USB Cable

1 x Manual

10m + 3 Nozzles

1 x Main Unit

10 x Ties

1 x Tube Cutter

2 x Bend Nozzles

1 x Tee Connector

1 x 10m PE Tube

10 x R-shape Clips

2 x End Caps

1 x Filter

3 x Universal Sprayers

1 x Micro USB Cable

1 x Manual

10m + 4 Nozzles

1 x Main Unit

10 x Ties

1 x Tube Cutter

2 x Bend Nozzles

1 x Tee Connector

1 x 10m PE Tube

10 x R-shape Clips

2 x End Caps

1 x Filter

4 x Universal Sprayers

1 x Micro USB Cable

1 x Manual