Controller Back Button Attachment For SONY PS4 Gamepad Rear Extension Adapter Electronic Machine Accessories For PS4 ControllerDualshock 4 Gamepad Rear Extension Keys
Description:This product is a PS4 Controller Paddles handle extended button, you can customize the mapping of the button function on the back, support the TURBO burst function,plug and play, and bring users a different gaming experience.
Instructions:1. Programming function setting: long press the SET button for 2 seconds, the corresponding LED flashes quickly (4HZ), and then short press the M1 or M2 button, the LED lights will flash slowly on the screen of the corresponding function (lighting sequence is ?, ? , ?, ?, R3, L3, R2, L2, R1, L1), and then press the SET key, the corresponding function will be mapped to M1/2; for example: when entering the programming mode, press the M1 key to display the LED Go to R1, and then press the SET button again, the LED on R1 will turn to long light, and the function of M1 will be R1; programming M2 is similar to the above. 10 LEDs are used as key function indicators to indicate the function of the programming keys, and up to 2 LED lights can be displayed.2. Cancel function: Press and hold the SET button for 5 seconds, the programming indicator LED will change from fast flashing to off, and the M1/2 function will be cleared. At this time, the button has no programming function.3. Programming button memory function: insert the back key extender into the handle, if M1/2 has no function, LED1 flashes slowly (2HZ) for 3 seconds and then goes out, long press the SET button to enter the programming mode and then LED1 flashes quickly; if M1/2 The last programming function is memorized, and the corresponding LED light is on. The previous programming function is saved when the power is turned off; the previous programming function is still retained when the handle is inserted again, and the factory default has no programming function.4. Turbo function setting: press and hold the function button and the Turbo button at the same time, the function button has the Turbo burst function; press the above key combination again to cancel the button Turbo function. If the Turbo function is set, after pressing the button, the LED corresponding to the function flashes quickly (4HZ).