The layout is reasonable, and the high-current part has opened windows and added tin to reduce losses and charging and discharging efficiency.
Both Type-A USB sockets are designed with 5P high-current USB sockets, and the contact copper sheet is thickened and widened to increase the overcurrent capability and reduce heat generation and loss.
Support SCP and VOOC high current output.
The USB adopts the sink plate design to reduce the overall height, the overall height is 7.5mm when laid flat, and the height of the USB-A is 6mm.
The 5 USB ports are by MOS tubes, and there is no need to worry about the short circuit of the USB port. The high-current traces will be tinned with copper to reduce the heating temperature of the motherboard when the current is high. It integrates PPS/PD3.0/PD2.0 fast charging protocol, and supports input and output two-way fast charging.
PPS output supports 5-5.9V@3A, 5-11V@2A,
PD3.0/PD2.0 output supports 5V@3A, 9V@2A, 12V@1.5A.
The input supports 5V/9V/12V voltage.
Integrated QC fast charging protocol, supports QC4+/QC4/QC3.0/QC2.0,
Class A is supported. QC2.0 supports 5V/9V/12V output voltage.
QC3.0 supports 5V-12V output voltage, 200mV/Step. fast charging protocol is integrated, and the output supports 5V/9V/12V. The input supports 5V/9V voltage.
The fast charging protocol is integrated, and the output supports 5V/9V/12V. The input supports 5V/9V voltage.
The SCP fast charging protocol is integrated, and the output supports 5V@4.5A. The input supports 5.5V@3A.
It integrates PE2.0 and PE1.1 fast charging protocol, PE2.0 supports 5V~12V output voltage, 500mV/Step. PE1.1 supports 5V/7V/9V/12V output voltage. The input supports 5V/9V voltage.
It integrates SFCP fast charging protocol and supports 5V/9V/12V output voltage.
The VOOC fast charging protocol is integrated, and the output supports 5V@4A.
type: module
Material: PCB
colour: black Package Contents:
1 x Module Only the above package content, other are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.