Compact and comvenient, easy to use. This product will make your life easier and convenient.
Features:
1. Electrical parameter measurement function (voltage, current, active , energy, frequency, factor)
2. Overload alarm function (over alarm threshold, backlight and flashing to alarm)
3. alarm threshold preset function (can set alarm threshold)
4. The energy can be reset use the key
5. Store data when off
6. Large-screen LCD
7. Backlight function
8. Key Function
Backlight control
Short press the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when off.
Reset energy
Step1: Long press the key for 5 seconds until the energy value flash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
Step3: If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state.
Set alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: window display the current alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active threshold is 0.0~2.5kW. it can display six parameters at the same time.
Specifications:
Working voltage: 80 ~ 260VAC
Test voltage: 80 ~ 260VAC
Rated : 100A/22000W
Operating frequency: 45-65Hz
Measurement accuracy: 1.0 grade
Size: 9*5*2.5cm
Wire length:19cm
Weight: Approx.110g
Display format:
1.
Test range: 0~22000W
Starting measure : 0.2W