Backboard material: 0.25mm PET; Product power: 5.0W +/- 5%; Working voltage: 6.0V +/- 5%; Working current: 833mA +/- 5% (max)
Open circuit voltage: 7.2V +/- 5%; Short circuit current: 916mA +/- 5%; Applicable : Solar Power Manager
Solar panel input voltage (SOLAR IN): 6V~24V; -USB input voltage (USB IN): 5V; Charge cut-off protection voltage: 4.2V +/- 1%; Over-discharge protection voltage: 2.9V +/- 1%
Solar panel charging efficiency: about 78%; USB charging efficiency: about 82%; 3.7V battery boost output efficiency: about 86%
Maximum quiescent current: less than 2mA; Working temperature: -40℃~85℃ 1. The power management module suitable for 6V~24V solar panels, supports charging 3.7V lithium batteries through the solar panel/USB interface, and supports 5V/1A regulated output.
2. With MPPT power tracking function and a of protection circuits, work is efficient, stable and safe, and can be used for solar power generation, low-power Internet of Things and other green environmental protection projects
3. Support multiple charging methods of solar panel/power adapter/USB
4. It is suitable for 6V~24V solar panels, which can be connected through DC-002 power socket or terminal block
5. Onboard MPPT SET setting switch, switch to a gear to the input voltage, higher charging efficiency
6. There are two forms of 5V voltage output interface on board pin header and USB, which is convenient for users to use
7. On-board -capacity aluminum electrolytic capacitors and chip ceramic capacitors, reduce ripple, and work more stable
8. Onboard 14500 battery holder and PH2.0 battery socket, convenient to access specifications of 3.7V lithium batteries
9. Onboard overcharge/overdischarge/anti-reverse connection/overtemperature/overcurrent protection circuits, stable and safe work
colour: black
Material: ABS+metal+monocrystalline silicon
Size: 65.2mm x 56.2mm Package Contents:
1 management module
1 x 14500 lithium battery
1 x solar panel Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.