915 Generation PLC Programmable Controller DC 10-28V PLC Regulator FX1N-14MT Industrial Control Board Programmable Controller

Small body and stable performance
This module is programmable and can thousands of functions
The operation is stable and
The built-in synchronization circuit can effectively the long-term operation of the module
Function
1 Turn on the power relay 1 is closed after N seconds of closure then relay 2 is closed after N seconds of closure
2 Turn on the power relay 1 is turned off after N seconds of closing then relay 2 is off after N seconds and then cycles
3 When the power is turned on relays 1 and 2 are not activated When there is a signal or the on is triggering relay 1 is turned off after N seconds is closed then relay 2 turns off after N seconds and then turns off until the trigger repeating the same action
By programming signals 12 any control of relays 1 and 2 can be performed
4 When signal 1 has a signal relay 1 is closed and relay 2 is off 5 When signal 2 has a signal relay 1 is off and relay 2 is closed
6 Only the NPN signal sensor can be connected and the sensor signal can be programmed to carry out any relay monitoring
7 When signal 1 has a trigger control relay 1 When signal 2 has a trigger control relay 2
8 Turn on the power control the engine to turn for N seconds then turn N seconds and
9 When signal 1 has a signal the motor is controlled to turn forward When signal 2 has a signal the motor turns
Condition
Model FX1N-14MT
Power Supply 10-28VDC
Maximum memory 8000 steps
Colour Black
Material Plastic
Package Contents
1 * Industrial Control Board
1 * housing
Only the above package content other products are not included
Note Light and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm