Product parameters
Receiver parameters
Working voltage: AC100-250V50Hz/60Hz
Power consumption: 50dB/1m
Transmitter Battery Model: 23A 12V
Transmit power consumption: 150 meters (open space without obstacles)
Receiver size:L95*W54*H40mm
Transmitter button parameters
1. Working voltage: DC 12V
1. Battery type: 23A 12V
2. Transmitter size: L80×W45×H21mm
Features:
Differentially set ringtones: Different buttons set different ringtones, easily distinguish between front and rear doors
Built-in 38 welcome music/3-level volume adjustable
This doorbell does not need wiring, plug and play, convenient and practical, easy to install
The receiver is suitable for direct plug-in, the applicable voltage range is 100-250V 50/60Hz
Applicable scenarios: residential, hotel, villa, hospital
Function: Learning Code
Remote control distance: Indoor distance is about 50 meters (without partition),Outdoor open space is about 100-300 meters. (This data is the experimental test distance. The actual distance is affected by the applicable environment and obstacles. The more obstacles, the shorter the distance. The actual distance is subject to the experimental environment distance)
How to use
Packaged products are paired before they leave the factory, and no need to pair again.
To replace transmitters or add transmitters, do the following:
Pairing method
The receiver socket is plugged into a regular household socket. When the power is on, (if different transmitters need to correspond to different ringtones, first press the music button to select the ringtone) and then press the receiver mode button for about 5 seconds until the indicator light flashes. Enter the pairing mode, at this time, press the transmitter, the receiver rings, the pairing is successful.
Clear the code
Press and hold the receiver pairing button for about 10-13 seconds until the indicator light quickly
After blinking, stop blinking, that is, clear all pairing codes.