Adopts ARM -M3 processor (STM32F103C8).Used for secondary development on the basis of this kit, for example, it can be changed to millivoltmeter, data loggers.
Auto/normal/single trigger modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous waveform before trigger (negative delay).
Can freeze waveform display at any time (HOLD function). Waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN././-/virtual values.
It features high sensibility, light and portable size, 2.4-inch TFT screen and protective case. It can display waveform parameters, such as frequency, period, pulse width, duty ratio, MAX./MIN././-/virtual values.
Waveform storage function: Will not lose the waveform after powering off.
Short-circuit and open-circuit detection: Can help the user find out the soldering error.
The SMD has been soldered, more suitable for electronic beginners.
Number of Channel:1
Analog Bandwidth:0-200KHz
Sensitivity Range:5mV/-20V/
Sensitivity error:Less than 5%
Maximum Input Voltage:50Vpk (1X probe)
Input Impedance:1M ohms/20pF
Resolution:12 bits
Record Length:1024 points
Coupling Modes:DC/AC/GND
Maximum Real-time Sampling Rate: 1MSa/s
Time Base Range:10us/-500s/
Trigger Modes:Auto, Normal, and Single
Trigger Types:Rising/falling edge
Trigger Position: Center of Buffer
Display:2.4inch Color TFT LCD with 320x240 Resolution
Supply Voltage:DC 9V(8-10V Acceptable)
Current Consumption:120mA @ 9V
Different batches, the product may have color difference, does not affect the use of
Plug Type:EU Plug,it applies to Indonesia, Germany, France, , Italy and so on.
Voltage:AC 220V
Colour:White
Material:Plastic
Package Contents:
1 * Oscilloscope
1 * BNC-clip cable
1 * Probe
1 * Power adapter
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.