Marvell 88SE9215 6 Ports SATA 3.0 To PCIe Expansion Card PCI Express SATA Adapter SATA 3 Converter

Marvell 88SE9215 6 ports SATA 3.0 to PCIe expansion Card PCI expre SATA Adapter SATA 3 Converter with Heat Sink for HDD

About Description:

Features: Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Compliant with PCI-Expre v2.0 specification, backward compatible with PCI-Expre v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Support 6 SATA Support AHCI1.0 mode and IDE mode Support for native command queue (NCQ) Support FIS based on port multiplier switch or command switching. Support hot swap and hot swap. Compatible with SATA6G, 3G and 1.5G hard drives Bus interface: PCI-Expre x1 slot Expansion interface: 6 SATA3.0 interfaces System Requirements: One PCI Expre X1 slot is available, supporting both PCI-E X2 X4 X8 X16 Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux Product driver file: 1. CD: ... DRIVER\SATA CARD\Marvell\91XX_92XX Setup, then select the appropriate folder according to the system. The PCIE to SATA3.0 riser card is used as follows: First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions: 1. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pa. Our card riser card starts the system. 2. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot. 3, the above two conditions are available, if it still can not start, or repeated reboots, then the motherboard's hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboard's hard disk interface options to Disabled, save and restart to start the system Second, the common disk and PCIE to SATA3.0 connection conditions and solutions: 1. When the system disk is plued into the motherboard, the ordinary disk is inserted in the PCIE to SATA3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup. 2, if the condition is established, or can not start the system, then you must enter the motherboard BIOS, set the system disk to the first boot. Third, the system disk and the ordinary disk and PCIE to SATA3.0 connection and solution: 1. Prerequisites, if the system disk with the motherboard installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through PCIE to SATA3.0 . 2, 1 condition is established, you can not start to enter the motherboard BIOS, set the system disk to the first boot. 3, 1.2 conditions are met, or can not start, then it may be integrated SATA interface conflict, please enter the motherboard BIOS to set SATA to Disabled

You'll receive:

1 x SATA III (6Gbps) 6-port PCI-Expre Controller Card

Please check pictures for more details.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.