KOKKO FLP2 Mini SOS Looper Pedal Portable Guitar Effect

Features:

---EASY TO USE---

------------------------------------------------------

-Record

Press the footswitch once. LED indicator shows red, it means SOS looper is in rec status.

Hit the footswitch again when you finish your riff. LED indicator shows green, it means SOS looper is in playback status. The riff start to loop continuously. LED indicator flashes every time when reaching the beginning of the loop.

The Maximum loop time is 5 mins.

-OVERDUB

Once you have your first loop, SOS looper would let you overdub your new riff infinitely.

To overdub over the riff, single press the footswitch when playbacking the loop. Now the LED will turn from green to red, that means SOS looper is in the recording status again and you are good to go.

Press again when you finishing your loop and SOS Looper goes back to playback status.

SOS looper plays all the overdub riff when in playback status. The new overdubbed riff doesn't affect the length of loop and the layers for overdubbing is unlimited.

-UNDO THE LOOP

Press and hold the footswitch longer than 1.5s to undo the last riff. There is only one last layer that is able to be undo.

When undoing the loop, LED indicator will flash quickly.

-REDO THE LOOP

You might want to redo the undo, press and hold the footswitch again longer than 1.5s, this will redo the loop that you just undo.

When redoing the loop, LED indicator will flash quickly.

Stop Rec/Play, double press the footswitch, stop recording or start to play.

LED indicator will flash in stop status to remain you the loop is still stored and it is ready to go.

-ERASING

To erase the whole loop, long press the footswitch in pause status. Double press and hold the second setup in Rec/Play Status.

When LED indicator lights off. It means there is no loop now in SOS. You could start to build a new loop. In this status, footswitch is for True by pass.

-STORE THE CURRENT LOOP

When the of SOS off, SOS automatically save the loop from last time. When you SOS up again, LED indicator shows green and flashes. Which means the loop from last time is still available. Single press will start to play. If you need to record or overdub, please refer to the previous section about them.

------------------------------------------------------

Powered by AC adapter.

Mini and portable, enclosure is aluminum alloy shell.

LED indicator shows the working state.

Rubber pads on the backside is anti-skid, which enhances the stability and avoids friction between the effect pedal and the ground.



Specifications:

Brand: KOKKO

Model: FLP2

Main Material: Aluminum alloy

Input Impedance: 1M Ohms

Output Impedance: 10K Ohms

Supply: External AC adapter delivering 9V DC regulated minimum 300mA

Item Size: 9.4 * 5.1 * 5.3cm / 3.7 * 2 * 2.1in

Item Weight: 175g / 6.2oz

Package Size: 10 * 7.5 * 6.2cm / 3.9 * 3 * 2.4in

Package Weight: 213g / 7.5oz



Package List:

1 * Guitar Effect Pedal

1 * User Manual(English)



Note:

Please use the 9V adapter whose polarity is positive pole outside and negative pole inside. Otherwise, the product may not work properly.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a