Handheld 315MHZ/433MHZ Wireless Remote Control Analyzer

This product can be used for wireless remote control equipment receiver, emitter production, debugging, and testing. Adopting a high-speed microprocessor chip with higher computing speed and larger capacity, the whole system can realize higher performance. Suitable for devices that use fixed code chip PT2262 and its compatible chip and learning code chip eV1527 and its compatible chip as coding chips, such as Locomotive, tram anti-theft device, safety products of the detection probe and remote control, electric shutter remote control, electronic weighbridge remote control, smarthome system remote control, access to the entrance of the road gate machine remote control installation and debugging and code address interpretation.



Features:

【High Portability and Durability】: The unit is compact and easy to carry. Built-in antenna with higher receiving sensitivity and higher emitting . Backlight has four modes to meet different user needs. Minimum standby operating current is 20mA, standby time is about 10 hours, with long durability.

【High-performance Microprocessor & Professional Receiving Emission Module】: Adopting a high-speed microprocessor chip with higher computing speed and larger capacity, the whole system can realize higher performance. At the same time, the device is equipped with a professional receiver module with two standard frequencies, 315Mhz and 433Mhz, dual frequency standby, and automatic seamless auto-switching. The receiving sensitivity is better than -110dbm, and the distance is 0-50 meters, but the specific distance also depends on the actual application conditions and environment. Transmission : 16dBm (40mW), the distance is 0-50 meters, but the actual distance also depends on the actual application conditions and environment.

【Automatic Identification and Decoding Function】: Automatic identification of the coding chip type of remote control devices, there are mainly two categories of coding chips on the market: Fixed-code(PT2262, PT2264, HX2262, LX2262, SC2260, SC2262, CS5211) and Study-code (eV1527, SCL1527, PT2240, RT1527, FP527, HS527). At the same time, the device can also automatically decode the frequency used by the remote control device and encode various parameters related to the chip, including the chip model, the value of the oscillating resistor used, the address code, and the data.

【Data Save & Data Editing】: Automatically save the collected data, there are 50 groups of large capacity data recording space, so will not lose data. Added full data editing function. You can edit the type of chip supported at will, and all the parameters of the corresponding chip, which is equivalent to adjusting the machine to become the universal remote controller of the chip supported, and you can save the above edited data in the corresponding group number, which can be used at any time. Added the function of locking/unlocking the collected data, so that users have a more convenient application.

【User-friendly Design】: It retains the function of simply editing the keydata in the search state, which can realize the three-state switch of the keybit (namely: 0, 1, F), and adds the working mode of point-motion starts and long-press starts that can simulate the actual application of the remote control (but this way, only the two-state switch of the keybit can be realized, namely: 0, 1,), so that the user can have a more handy application.

【Multifunctional Design】: Specifically for the characteristics of XX2262 chips, a collection of scanning functions, can be used in the absence of a remote control, in this way, scan the code of the device used with XX2262 chips. The set has shielding functions, which can shields the wireless remote control signal of the relevant frequency of 0-50 meters.

【Wide Applications】: This product can be used for wireless remote control equipment receiver, emitter production, debugging, and testing. Suitable for devices that use PT2262 fixed code chip and its compatible chip and eV1527 learning code chip and its compatible chip as coding chips, such as Locomotive, tram anti-theft device, safety products of the detection probe and remote control, electric shutter remote control, electronic weighbridge remote control, smarthome system remote control, access to the entrance of the road gate machine remote control installation and debugging and code address interpretation.



Specifications:

Name: Remote Control Analyzer

Material: plastics

Battery: 2 * 400mAh lithium battery (included)

Standby current: 20mA

Test frequency ranges: 315M/433M

Transmit : 16dBm(40mW)

Receiving sensitivity: > -110dbm

Decoding chip type: fixed code: PT2262 and compatible chip; Learning code: eV1527 and its compatible chips

Data storage: 50 groups

Item size: 90 * 70 * 28mm / 3.54 * 2.76 * 1.10in

Package size: 180 * 150 * 50mm / 7.09 * 5.91 * 1.97in

Package weight: 150g / 5.29ounce



Packing List:

1 * Remote Control Analyzer

1 * Adapter