915 Generation Grbl CNC Z-Axis Router Touch Plate Tool Setting Probe Milling Tool for CNC DIY Engraving Machine

The function of the tool setting instrument The measurement and compensation of the tool offset value in directions can effectively eliminate the error and inefficiency caused by manual tool setting No matter what kind of tool is used for workpiece contour turning or milling all tool tip points or tool axis lines involved in must be adjusted or compensated so that they are accurately located at the same theoretical point or axis of the workpiece coordinate system on-line
How to use
1Alligator clip is fixed on the
2 port has been connected to the control board A5 interface on the 3018pro control board
3P plastic aluminum plate under the tool

material plastic
Color as shown
GRBL Z-probe CNC Router Tool Setting Automatic Tool Setter Thickness 16mm ±003mm
Tool Setting Function It can accurately locate the working surface and is most suitable for PCB engraving
Easy to Use You can refer to video to understand how to use it correctly
Probe change the Probe in Grbl to G91G21G382Z-30F100G92Z16G0Z5F10
What does G91G21G382Z-30F100G92Z16G0Z5F10 mean
G91 Use relative coordinate mode
G21 Use mm unit
G382 Tool setting instruction
Z-30 The Z axis moves 30mm in the negative direction if it touches the tool setter it will stop and set this point as the origin
F100 the speed of the Z-axis when it is running
instruction
G92 Coordinate offset because the tool setter has a thickness in order to remove the thickness of the tool setter you need to set the offset
Z16 Z-axis offset 16 16 is the thickness of the tool setter which is subject to the actual measured thickness of the tool setter
instruction
G0 fast moving
Z5 The Z axismoves to the position of coordinate 5 which is convenient for taking out the tool setter
F10 Z-axis upward movement speed

Package Contents
1 x Z-Axis Router Touch Plate set

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm