GERMA 433Mhz Universal Wireless DC 12V 1CH relay Receiver Module with 4ch RF Transmitter 433 Mhz Remote Controls

GERMA 433Mhz Universal Wireless DC 12V 1CH relay Receiver Module with 4ch RF Transmitter 433 Mhz Remote Controls

• I am an international seller，100% brand new and of high quality

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Support APP : NoFrequency : 433 MHzChannel : 1Package : YesWireless Communication : RFUse : Universal,Lighting,Electric Door,Automated curtains,SWITCHBrand Name : GERMAOrigin : Mainland ChinaCertification : CE,RoHSModel Number : KT05-4&KR1201-4Working Voltage : 12VOutput Terminal : NO , NC , COMQuiescent Curren : 5mAModulation Mode : ASKReceiving Sensitivity : larger than 97dbmWorking temperature : -30 ~ +80Matching Mode : Intelligent Learning ePCB dimension : 35*30*18mmShell : yesRF working mode : superheterodyne








GERMA 433Mhz Universal Wireless DC 12V 1CH relay Receiver Module with 4ch RF Transmitter 433 Mhz Remote ControlsSpecifications for transmitter:
Model Number: KT1004-4K-4
Operating RF Frequency: 433MHz
ed System: 1527 Learning e
Working Voltage: DC 12V
Working Current: 12mA
Transmitting Power: 10mW
Wireless Operating Distance: 150m(Free Space)
Transmission Rate: 50 ~ 60KHz
Frequency Deviation: +0.2MHz or -0.2MHz
Oscillation Resistance: 340k
Color: White
Package Size: 9.3 * 4.2 * 1.6m / 3.66 * 1.65 * 0.62in
Package Weight: 40g/1.1oz
Features:
*Adopts built-in 1527 working chip, fully compatible with receiving module with common learning e(1527) Chip, such as, PT1527, EV1527, etc. Compatible with the most of 1527 Remote Control Relay Receiver Module, If the remote control is lost, buy one and pair with the receiver is OK.).
*Adopts radio frequency technology and stable circuit, high accurate and high-effective, individuation and humanization design, bringing you much convenience.
*Strong RF signal, high-sensitive and omnidirectional, you can turn on/off the receiver (not included) by the 433MHz remote control (transmitter) from any place within a reliable distance (150m open area). (The wireless RF signal can pass through walls, floors and doors.).
* Easy to install and use, the 4 channel remote control system lets you take control of your gadgets, car and home or garage.
*Widely Use: It can connect to the electronic control lock, light, fan, window, curtain, motor, car, lifting appliance, motor control, lifter control or other appliances with DC12V. So that it can remote unlock the door, close the light, open or close the curtain, etc.
Note:
1.This remote control only support the learning e (1527) of the receiver
2.This remote can not be programmed.
3.It will not work if you only buy the transmitter. it is parts of the remote control system, it needs work with the Remote Control Relay Receiver module to achieve controlling.
4.We don't offer retail package, but we will pack it well before shipped out.Specifications Of The Receiver:
Model 
Number :  
KR1201-4
RF Working Mode: Superheterodyne Reception
Modulation Mode: ASK
Working Mode: Momentary, Toggle, Latching and Time Delay Mode.
Input Voltage: DC 10 ~ 14V
RF Frequency: 433MHz
Quiescent Current: 5mA
Receiving Sensitivity: >97dbm
Remote Control Range: >100m (Free Space).
Wired Connection Way: Fixed Wiring Pillar.
Deing Mode:MCU Software Deing.
Working Mode:Momentary, Toggle, Interlocked Mode Latching Time delay (5s ,10s ,15s )Wiring Diagram 1:          
+V : 12V + (Input).
- V:  12V - (Input).
NO: Normal Open(Output).
COM:Common(Output).
NC: Normal Close(Output).
Color: Green (PCB Board), Black(Outside Shell)
Circuit Board Size: 3.5 * 3.0 * 1.8cm
Operation Introduction
: 
About Working Mode: 
Momentary: 
Press the remote button, the relay connects, release the remote button, the relay disconnects. 
Toggle: 
Press once the remote button, the relay connects, press the remote button twice, the relay disconnects. 
Latching:
 Press the remote button A, the relay connects, press the remote button B, the relay disconnect.
Time Delay Mode:
 Press the remote control button, the relay connects; Start timing when release the remote button, the relay disconnect automatically after 5s or 10s or 15s. 
Clearing the e:
Press the Learning Button on the receivers for 8 times, the es will be cleaned. 
After cleaning the e, all the remote control cannot work any more. 
Learning the e:(Momentary)
Press the learning key on the receiver once time, it comes into momentary setting mode. 
Wait for a moment, the LED will be off , it comes into learning state. 
Push the remote button, LED indicator on the receiver board will flash then come off. 
After 3 seconds, the LED indicator will be on again, learning successfully. 
Learning the e: (Toggle) 
Press the learning key on the receiver twice time, it comes into toggle setting mode. 
Wait for a moment, the LED will be off , it comes into learning state. 
Press the remote button, LED indicator on the receiver board will flash then come off. 
After 3 seconds, the LED indicator will be on again, learning successfully. 
Learning the e:( Latching) 
Note: 
When you choose for latching mode, in order to learn more remote control, you need to learn two different button, the first time learning is for ON, the second time learning for OFF. 
For example: Button A = ON, Button B = OFF 
Press the learning key on the receiver triple time, it comes into latching mode . 
Wait for a moment, the LED indicator on the receiver board will flash then come off. 
Press the remote button A. LED flash for 5 times. 
Press the remote button B. LED flash for 5 times 
After 3 seconds, the LED indicator will be on again, learning successfully. 
A = ON, B = OFF .  
Learning the e :(Time Delay Mode) 
Press the learning key on the receiver four times, the time delay for 5 seconds. 
Press the learning key on the receiver five times, the time delay for 10 seconds. 
Press the learning key on the receiver six times, the time delay for 15 seconds. The LED indicator will be off . Press the remote button, LED flashes and off. 
After 3 seconds, the LED indicator will be on again, means learning successfully. 
Note:
the system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .





 























?width=960&height=87&hash=1047,




















?width=960&height=87&hash=1047,

















?width=4167&height=4167&hash=8334,


?width=4167&height=4167&hash=8334,


?width=4167&height=4167&hash=8334,