XYCD60L Battery Charging Control Module Protection

Charging mode IN: By setting the upper limit voltage UP and the lower limit voltage ; when the battery voltage ≤ the lower limit voltage , the relay is turned on, and the charger starts to charge the battery; when the battery voltage ≥ the upper limit voltage UP, the relay is turned off to complete an automatic charging; the relay is turned on, IN flashes to indicate it is charging.
Discharge mode OUT: By setting the upper limit voltage UP and the lower limit voltage ; when the battery voltage ≥ the upper limit voltage UP, the relay is turned on and starts discharging; when the battery voltage is ≤ the lower limit voltage , the relay is turned off to complete an automatic discharge function; the relay is turned on, OUT flashes, Indicates that it is discharging.
Note: This product is a simple voltage controller, the output is turned through a relay, it only plays the role of a switch and cannot change voltage.
Color: black
Material: + electronic components

Function Description:
1. Calculation of voltage percentage: battery voltage / (upper limit voltage - lower limit voltage)
2. Button function:
UP button: short press to switch display % and time, long press for 5 seconds to switch modes, charging mode: IN, discharging mode: OUT
SET button: Short press to view the currently set ; long press the SET button to enter the setting interface, set UP: voltage upper limit, : voltage lower limit, OP: conduction time, : delayed conduction time (0-999 seconds) , FOP in discharge mode: forced (0-10 seconds)
DOWN button: Short press to turn off/on the relay enable (emergency stop function) after it is turned off, the LCD display is OFF, and the relay is disconnected

Package Contents:
1 x Battery protector

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.