XR3 Pro Digital Nuclear Radiation Detector Geiger Counter Se

More sensitive than other nuclear radiation detector, wide measuring range, has a long service life. screen display makes it easier to read data, and the buttons are easy to operate.
The housing is made of fine quality ABS, which has fine heat resistance and cold resistance, high strength and fine toughness.
Both electromagnetic radiation and nuclear radiation can be detected. It can meet the needs of detection, substation detection, mobile signal tower detection, etc.
It can also be applied to material inspection, environmental test, radiology protection, radiopharmaceutical screening, etc. With mute, alarm, particle sound selection button, test, mean value reset retest selection button, backlight can be turned on or off.
Model: XR3 Pro
Screen size: 57X 43mm / 2.2 X 1.7in
Nuclear radiation detection:
Detection technology: G-M detection technology
Detectable types: , Gamma, X-ray
Energy range: 20kev~3.0mev less than equal ±30%(137Cs-)
Sensitivity: 80cpm/μsv/(Co-60)
Test accuracy: 0.01μsv/h
Real-time range: 0-99.99μsv/h
Cumulative range: 0-99.999msv
Real-time error: less than equal 10%
Mean error: less than equal 3% Temperature and humidity detection
Electromagnetic radiation detection:
Test range: S 0-99.999 μw/cm² ( density)
E 0-99.999 V/M (electric field strength)
H 0-99.999 μT (magnetic field strength)
Test Accuracy: S 0.001μw/cm² ( density)
E 0.01 V/M (electric field strength)
H 0.001 μT (magnetic field strength)
Frequency Range: S 50MHZ-5GHZ ( density)
E 20HZ-100MHZ (electric field strength)
H 20HZ-1MHZ (magnetic field strength) supply mode: 3 * AA 1.5V battery or 3 * 1.2V rechargeable battery
Charging: USB 5V 2A input
Charging time: greater than equal 4 hours
Colour:yellow
Material:plastic Package Contents:
1 x Nuclear Radiation Detector(without battery) Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.