XML-T6 L2 Led Glaring Headlamp Charging Long Shot Waterproof V9 Fishing Headlight LED Headlight

Note That This V9 Lamp Holder Switch Is on the Side of the Head.

A Single Headlight Does Not Contain Batteries and Chargers. If You Need Batteries and Chargers, Please Take Suit. If You Don't Understand, Please Contact Customer Service.

Light Source: XML-T6
Power Supply: 18650 Lithium Battery * 2
Brightness: W
Range: 0-200 M
Gear: 3 Gear (Strong Light-Low Light-Flash)

Battery Life: 3-8 Hours (Depending on Battery Quality and Usage Gear)
Weight: about 208G

Scope of Application: Outdoor Cycling, Adventure, Mountaineering, Camping, Fishing, Home Use, Etc.

Strong Light Flashlight Instructions
1. Instructions for Use of the Switch
1. the Battery Is the Positive Pole Facing inside (the Side of the Lamp Holder), and the Negative Pole Facing outside (the Tail).
2. the Switch Is at the Tail, the Switch Function Bearing Switch Is the Switch Function, and the Light Switch Is the Dimming Function.
II. Circuit Board Instructions
1. Our Store Torch Adopts Advanced Constant Voltage and Constant Current Technology, Which Can Effectively Solve the Requirements of LED Torch for Constant Voltage and Constant Current.

Q: What Should I Do If the Bulb Is Broken?
Answer: If the Lamp Has a Life of 10W Hours and Is Unfortunately Broken, You Can Contact Us to Exchange It at a Discount.
Q: What Is Lithium Battery over Discharge?
Answer: the Brightness Is Obviously Weakened and Continues to Be Used, Resulting in Battery Damage. Even after Professional Activation, the Power Will Be Significantly Reduced. Therefore, Please Pay Attention to the Maintenance of the Battery at Ordinary Times and Charge More.
Precautions for Use of Strong Light Flashlight
Do Not Disassemble the Lamp Holder Frequently to Avoid Reflective Cup Or Bulb Damage.
Bright Light Flashlight Maintenance Precautions
When Using, Please Carry out Daily Torch Maintenance on Regular So That It Can Continuously Provide You with High-quality Service.
1. Please Wipe Torch with a Clean Soft Cloth after Each Use.
2. When Torch Is Contaminated with Seawater Or Corrosive Liquid, Please Clean It with Clean Water and Dry It with a Hair Dryer.
3. When the Lamp Holder and Tail Hood Are Not Smoothly Twisted, Please Apply a Small Amount of Silicone Grease at the Interface.
4. Please Take out the Battery and Store It in a Cool Place When Torch Is Not in Use

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.