Xinmotek XM~11 LED 2 Players Game Controller With Wires Arcade Gamehine Accessories

The price include wiring with harnees and USB cable: 1 MicroUSB cable (1.8M) +20 on wires (on and LED2.8mm or 6.3mm terminal) + 2  wires.

(If you need 5pin wire:https://www.aliexpre.com/item/1005005552161607.html?spm=5261.ProductManageOnline.0.0.6f884edfo7wcHV)

Product Name: PS3/PC 2 Players Game Controller with LED

Type ID: XM-11

Features:

USB 2.0 protocol, the response speed is faster than USB1.1;

MicroUSB for connecting any standard USB cable;

Compatible with win10/win8/win7/vista/XP/2000/98, PS3, Linux,, Android, Raspberry Pi;

No Support PS3 Home on(PS on);

Supports Mode on for direction control switching between X/Y axes and Dial-pad;

Lead-free proce;

No required;

Kit contains all the wires with harnees and USB cable;

Every player's on 1 to 8 each has a corresponding LED indicating their status.

Every player's on 1-8 LED effect can be configured to the following 4 states. The default state is that all the LEDs are disabled.

Always lighting on;

All LEDs are turned off status, the corresponding LEDs light up when the on is preed.

All LEDs are turned on status, the corresponding LEDs light down when the on is preed.

Disable all LED(default).

Use the 's UP + Mode on to switch through the above modes.

When all the ons have not been preed for more than 6 minutes, all LEDs show a breathing effect.

The LED effects and Mode configuration are stored internally. time plug in will read these configuration first, No need to reconfigure.

Please note: The LEDs use a common anode connection. The LED is a , so the pins have the difference between positive and negative electrodes. If the pins are red, it will not light.