Xiaomi Plug-in Board QuiCharge Version 27W MAX Fast Charging 3 USB Ports Overload Protection Independent Safety Door

Xiaomi Plug-in Board QuiCharge Version 27W MAX Fast Charging 3 USB Ports Overload Protection Independent Safety Door

Specifications

Shell material: flame retant polycarbonate

Seat size: 255 x 50 x 30mm

Length Full Length: 1.8m

Net weight: about 390g including wire

Technical s: 2500W MAX, 10A MAX, 250V~

USB module input 100-240V~, 50/60Hz, 0.7A

USB module single port output 5V=3A / 9V=3A/ 12V=2.25A USB

Module multi-port output 5V=4.2AUSB

Module total output power 27W MAX

Xiaomi Power Strip Extension Socket 3 USB 3 Sockets 2A Fast Charging Flame Retant Overload Power Off Smart Plug 

Product name: Xiaomi patch board including 3-port USB 2A fast charging converter

Product model: XMCXB01QM

Executive standard: Q/DXQMK0001-2015

Shell material: high temperature resistant and flame retant PC engineering plastics

Seat size: LxBxH=225x41x26 mm

Product length: 1.8m

Product weight: 300g including line

Rated input: 10A, 250V~

Rated output: 10A, 250V power socket

Rated power: 2500W

USB module input: 100-240V~, 50/60Hz, 0.5A

USB module output: single USB, 5V-2.1A TYP three USB, 5V-3.1A TYP

Operating environment: - 10 ℃~+40 ℃



【 Warning 】

1. The total power of the connected electrical equipment must not exceed the rated power.

2. Do not use power cables in the bound or unexpanded state to avoid abnormal overheating.

3. The front end may be improperly grounded or non-standard grounded.

4. Do not use in humid environment.

5. Do not remove or open the bacover without permission.

6. Prevent ing and keep away from heat.

7. Children should not use this product alone without adult rvision.

8 This product does not provide lightning protection function. You are ased to turn off the power in lightning environment. When this product is energized,

do not use conductors or other tools to test the opening force of the protective door. Do not open, alter, repair or maintain this product for non-professionals.

【 Attention 】

1. When the product is used due to overload and overload and the load current exceeds 10A, the overload protection switch will disconnect the power supply for safety protection. After removing the electrical equipment, you can manually close the switch.

2. When the USB port of this product enters the protected state due to various reasons such as output short circuit or overload, it cannot be charged normally. After the faulty device is removed, it automatically recovers to normal.