Wireless ON/OFF 1/2/3 Ways 220V Lamp Remote Control Switch Receiver Transmitter Controller Indoor Lamp Home Repments Parts

Features: Perfect for remote controlling of droplight, crystal lamp,  modern low-pressure lamp, absorb dome light, day flower lamp, fluorescent lamp,  energy-saving lamps, exhaust fan, LED light etc. Fast and easy , not obstructed walls, capable of connecting any loads. Remote controller and switch can be used  simultaneously for ease and flexibility. Every set of remote controlling switch has its special code. More sets can be used in one room without interference. One Way Remote Control Switch: Function: ON/OFF and A, power on and off function. (B is an empty key, no effect)  Press SLEEP,the light flash once. Then do not move the remote control switch and turn it off in about 8-12 seconds. Specifications: Remote controlling distance: within 30m Input voltage: 180-240V Every port load:  fluorescent lamp: 600W; energy-saving lamp: 300W Working temperature: -20c 60c Material: ABS Size: remote control:11m*4.2cm*1.5cm; main device: 6.0cmx4.5cmx2.5cm Power: 12V 23A battery(not included) Two Way Remote Control Switch: Function: 1. A/1 will light after power on. 2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the green group, ''ON"/"OFF" means turn on/off the whole item. 3. Manual lighting sequence (wall switch control): A / 1 , B / 2 ,the whole circuit will be turned on. Specifications: 1. Each group can bear the 1000W incandescent light and 300W energy saving lamp. 2. Working Voltage: AC180V-240V50Hz/60Hz 3. Remote Control Battery: 12V 23A battery (Battery is not include) 4. Remote Control Distance: 30m 5. Load Power: 1 6. Resistive Load: The largest output power of single group within 3000W.(Like  incandescent light or light , etc.) Three Way Remote Control Switch: Function: 1. A/1 will light after power on. 2. A/1 uses to turn on /off the blue group, B/2 uses to turn on /off the white group, C/2 uses to turn on /off the yellow group, "ON"/"OFF" means turn on/off the whole item. 3. Manual lighting sequence (wall switch control): A/1 , B/2 , C/3 , the whole circuit will be turned on. Specifications: 1. Working Voltage: AC180V-240V50Hz/60Hz 2. Remote Control Battery: 12V 23A battery (Battery is not include) 3. Remote Control Distance: (Indoor)Greater than 20-30m 4. Load Power: 1  5. Resistive Load: The largest output power of single group within 1000W.(Like incandescent light or light , etc.)   1 X Remote Control Receiver 1 X Remote Control Emitter

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.