Wireless microphone headset system: [●●●Only For
Mic Jack, Not Aux Jack, Otherwise No Sound●●●]●Built-In
High Sensitivity Condenser Microphone, Transmission Distance Upgrade To 160
Feet (50m) ●Signal Stability●No Delay●No Radiation ●Anti-Howling ●Anti-Jam ming ●Constant Frequency ●Clearer Sound Quality. Compatible Voice Amplifiers, Multimedia.It Is
A Portable Karaoke Equipment.(Excludes Amp&Not Supported
Iphone, Bluetooth Speaker, Pc And Laptop)●●●Fcc Id Obtained By
Fcc Test●●●
Easy to use: Please Turn On The Transmitter
And Receiver Power Switches, The Blue Light Will Flash For Approximately 2s,
Indicator Light Stops Flashing After A Successful Match, And Then You Can Use
It,No Further Action.●Headset And Handheld Is 2 In 1 Design, Easily Change The Handheld
Mode To Headset Mode To Meet Your Needs.Not Supported Android Phones, Iphones,
Macbooks, Laptop, Bluetooth Speaker.
Charge and work of wireless microphones: ●The
Transmitter And Receiver Are Built-In 400 Mah Rechargeable Lithium-Ion
Batteries That Can Offer About 6 Hours Working Time. ●Usb Cable
Has Two Micro Usb V2.0 To Charge For The Transmitter And Receiver At The Same
Time, Fully Charge Is Only 2.5 Hours.●Perfect Application:
●The Plug On The Receiver Is 3.5mm. For 6.35mm Amplifiers,Please Use
The Additional 6.35mm Adapter(Included)To Connect More Equipments.
Use multiple wireless microphone at the
same time: Please Refer To The User Manual To Channel Switching( Max 15 Channel
) In (●Part 4 Advanced Operations To 4.2 Note B,Page 8) Otherwise There
Maybe Noise Or No Sound. Use Up To 15 Microphone Headset At The Same Time.
Built-In Cardioid Polar Pattern Condenser Microphone,Widely Applied To
Conference,Speech, Web Podcast,Youtube, Google , Outdoor Live, Yoga Instructor,
Voice Amplifier, Dancing Instructor, Promotion, Game Etc.
What if i can't pair or no sound: ●1.Turn Off
The Receiver And Transmitter,● 2.Turn On The Transmitter(Handheld
Microphone), Blue Light Is On, Long Press “+ ” To Blue
Light Flash ●3.Turn On The Receiver And Wait For The Connection ●4.The Blue
Lights Of The Transmitter And Receiver Stop Flashing, The Connection Is
Successful.
What if I can't Pair or not sound ?
·
1. Turn off the
receiver and transmitter
·
2. Turn on the
transmitter(Handheld
microphone), blue light is on, long press “+ ” to blue light flash
·
3. Turn on the
receiver and wait for the connection
·
4. The blue
lights of the transmitter and receiver stop flashing, the connection is
successful.
Use multiple wireless microphone headsets at the same
time.
·
1. Maintain the
first set can be used normally.
·
2. Re-pair the
second set. Then long press the "-", wait for the blue light to flash
quickly once( switch channel once), confirm they have no interference and work
normally.
·
3. And so on,
the third set should re-pair and switch channel three times...
In order to make the wireless microphone Headset work normally,
after receiving the product please charge it for 2.5 hours before using.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a