Wireless LED Curing Oral High Power Photosensitive Machine Cure Lamp

CURING LED B TYPE
This light-curing machine with adjustable working hours, working time visual, curing effciency higher characteristic. This light-curing machine equipped with charging status recognized by charging stands ( charging: the indicator ; charging end: led BAA; left: LED shining host ) This light-curing machine at work, every 5 seconds buzzer "di" tone, while at the same time shows the time remaining on th display; non-work time, 120 seconds without any key is pressed, the light-curing machineautomatically shu down to conserve power; shut down state, press any key to boot.
FEATURES
1. Selection of high power LED, intensity is high, long service life; 2.Cold source, less heat and a long time of use; 3.Beautiful and has excellent heat transfer; 4.A variety of work mode options: , mode ; Gradually mode; Pulse mode 5.Automatic shutdown, low-power alarm; 6. Display using digital work time, clarity, and time can be in controlled in 5-40s; 7.Sleep screensavers function, saving power
8. Automatic memory function-automatic saves last job when the function and the number of the seconds.
FUNCTION KEYS
ON/OFF button： (1) Turn on or turn off the LED blue-ray output (2) Can make the machine run TIME button ： (1) You can set the working time (10s, 20s, 30s, 40s) (2) Can make the machine run
USING TIPS
When curing a resin composite restoration, dentists are recommended to: 1. Position the tip as close as possible and parallel to the restoration, when using curing . 2. The use of orange filters are needed, for protect the from eye damage during curing; to prevent the from overheating. 3. When the intensity of the machine becomes weak, you can charge it to improve performance.