Wireless Immobilizer Car Engine LoAnti-hiing on Off ligent Circuit Cut Off Alarm Auto Car Inmoviliza Engine Lock

CHADWIM506 Car ligent Immobilizer System Anti-robbery 12V Universal ligent DIY Anti-theft Oil Circuit Engine Lock

NOTICE:

When not using the system, turn the e off for extended battery life. This product is not waterproof.

Description:

*1. Unit: 48*26*15mm

*2. e: 33*33*4.5mm

*3. PaBox: 165*92*48mm

*4. Weight: about 0.2kg

*5. Unit Working Voltage: 12V±3V

*6. Unit Quiescent Current: ≤12mA

*7. Unit Control Current: ≤30A

*8. e Control Operating Current: ≤3~8mA

*9. e Control Standby Current: ≤1uA

*10. e Control Battery: CR2032

*11. e Control Frequency: 433.92MHz

*12. Applicable Models: 12V oline car/12V motorcycle

*13. Installation Location: oil fuse (directly rep the car fuse)

*14. Product Function: cut off the oil and turn off the engine

*15. Features: fast installation, non-destructive plug-in, stable performance

Package Includes:

1 x Unit with Wire(Fuse=15A)

2 x r e

1 x User Manual(English)

Features:

*1. Circuit lomode (no short-circuit ring is inserted in the unit inside); factory default mode

*2. If the car does not receive the signal from the e control within 16 seconds after starting the car, the engine will turn off. The car can start normally if it 

*3. Support Manual and Auto modes. Manual: pre the e control every time or immediately after start-up; Auto: Just carry the e control with you.

*4. LED indication function: When receiving a e control signal, the LED fes once, indicating that the signal is normal, and no signal will not f.

*5. How to Install: First open the fuse box, find the oil fuse and pull it out, then rep it with the red wire plug. Keep the fuse in a safe p, fix the main unit with a tie and cover the fuse box.

Anti-robbery mode: (the host inserts a short-circuit ring)

*1. When the host receives the signal from the e control, the car can start normally, and it needs to continue to receive the signal from the e control in the middle, otherwise it will turn off after 30 seconds if the signal is not received.

*2. LED indication: when the signal from the e control is received, it fes once for 1 second; when the signal is not received, it fes 2 times per second for 11 to 20 seconds; when the signal is not received for 21 to 30 seconds, the LED fes 4 times per second. (After 30 seconds and more, the signal LED does not light.)

*3. The e control in anti-robbery mode must turn on the automatic mode, otherwise it will turn off halfway due to no signal received.

How to use the e control?

Please keep the e control alone, do not mix with the car keys to increase the diffity of grabbing. learning: Pre the host computer learning code switch to let go, immediately pre the e control on, the relay in the host will beep 3 times to indicate that the code learning is succeful, and the method for learning the second e control is the same as above. Up to 2 can be learned. The code has been learned well when leaving the factory, and there is no need to repeat the operation.