This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
8 units left
Shipped from abroad
Free return within 15 days for all eligible items.Details
International Department Store
60%Seller Score
Be the first to follow
This seller does not have enough history for us to evaluate his performance yet
Wirele Weather Station Dual Mount Wind Sensor LCD Display Anemometer Wind Speed Direction Chill Tometer Hygrometer Clock
Description:
Thank you for purchasing the Digital Wirele Weather Station with Dual Mount Wind Sensor. This state-of-the art measurement instrument is engineered and designed to meet the highest quality standards…to aure you uncompromising This instrument will provide measurements of wind speed & direction, wind chill, temperature&humidity.
Specification:
Indoor/outdoor temperature display. Display units options:ºF / ºC(r setting).
Indoor temperature range: 32°F to 122°F (0°C to 50°C);
Outdoor Temperature range:
Alkaline batteries: -4°F to 140°F (-20°C to 60°C)
batteries: -40°F to 140°F (-40°C to 60°C);
Resolution (for both indoor/outdoor temperature): ±2°F/±1ºC
Temperature accuracy: ±2°F/±1ºC
Humidity range: 20% to 90%
Humidity accuracy:±5%
Receiver:
Alkaline battery: 2 AAA 1.5V
Wind e Sensor:
Alkaline battery: 2 AA 1.5V or AA battery(Not Included)
Battery life: 12 months (Approx.)
Station dimension: 20.5” height x 9” diameter
Receiver dimensions: 4.9” height x 2.7” width
Display dimension: 2.36” height x 1.77” width
Perpetual Calendar:
The hour display format can be set between 12 hour format or 24 hour format.
The time zone can be set from-12 to +12(r setting).
Daylight saving time is adjusted automatically (The daylight saving time is adjusted on the basis of different time zone).
The date display format can be set as: YYYY-MM-DD, MM-DD- YYYY,DD-MM-YYYY (r setting).
Wirele 433 MHZ receiving. Available distance: 328 ft in open field. While receiving RF, pre any key to quit. Indoor/outdoor relative humidity (RH %) display.
Display range: 20% to 99%.
Resolution: 5%. Wind-chill temperature display.
Display units options: ºF / ºC (r setting).
Dew-point temperature display. Display units options: ºF / ºC (r setting).
Wind speed and wind direction display.
Average wind speed and gusts display.
The units can be set as m/s,km/h,mph,knots or bft (r setting).
Wind speed range: 0 to 50 m/s;
Wind direction range:E,S,W,N,SE,NE,SW,NW.
All maximum/minimum data can be recorded and displayed.
In addition, the time of recorded data can be displayed as well. The weather alarm can be set separately, any value can be set. The alarm signal lasts 2 minutes.
Troubleshooting:
If the Receiver does not receive a nsmiion from a e unit channel for 10 minutes, the wind speed, outdoor temperature and humidity will show dashes.
To correct this problem:
1. Go to the e location of that channel to check that the unit is properly positioned, within the appropriate nsmiion range.
2. If new batteries are faulty on the initial installation, install fresh batteries. If you did not notice the Low Battery icon warning and the product performed correctly after initial set up, the batteries have lost their charge. Replace the batteries.
3. Check to make sure the nsmiion path is clear of obstacles and interference.
& Care:
1. The home receiver is intended for indoor only. It is not sealed against moisture and could be damaged if d outdoors.
2. Do not immerse the receiver in water. If youll liquid on it, dry immediately with a soft, lint-free cloth.
3. The Wind e Sensor is weather resistant but not waterproof. Do not immerse it in water or allow snow to aculate on it. If this accidentally occurs, dry it immediately with a soft, lint-free cloth.
4. Though the Wind e Sensor is weather-resistant, it should not be left outdoors in extreme weather conditions. If these conditions become likely to occur, temporarily move the nsmitter to an indoor area. Otherwise, permanent damage to the sensor's internal circuits or external wind vane may occur.
5. Do not mount the Wind e Sensor on a metal surface.
6. Do not subject the Wind e Sensor to extremely severe temperatures.
7. Do not clean either unit with abrasive or corrosive materials. This may scratch plastic parts and corrode electronic circuits.
8. Do not subject either unit to exceive force, shock, dust, temperature or humidity. This may result in malfunction, shorter electronic life span, damaged battery or distorted parts.
9. Do not tamper with either unit's internal components. Doing so will invalidate the warranty on this product and may ca damage. The unit contains no r-serviceable parts.
10. Do not mix old and new batteries. Do not dispose of batteries in fire. Batteries may explode or leak. Do not mix Alkaline, carbonzinc (standard) or Nickel-Cadmium (rechargeable) batteries. Remove the batteries if the units will not be d for a long period of time.
11. Always read the instruction manual before operating this product.
ant:
Though the Wind e Sensor is weather-resistant,it should never be submerged in water.
If extreme weather conditions are likely to occur, temporarily move the nsmitter to an indoor area for protection.
Package List:
1xWind Speed Weather Station(Battery Not Included)
1x r Manual
About shipping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!