Waveshare USB to RS485/422 Rail-Type Industrial Isolated Converter FT232/SP485 Chip FT232RNL 300Bps-3Mbps USB Converter

1. Adopting the imported FT232RNL+SP485EEN chip scheme, high-speed communication is stable, reliable and compatible
2. On-board TVS (transient voltage suppression tube) can effectively suppress the surge voltage and transient peak voltage in the circuit, and prevent-lightning and static electricity
3. The on-board self-recovery fuse and protection diode can ensure the stable output of current and voltage, prevent over-current and over-voltage, and improve the impact resistance
4. Onboard 15KV ESD isolation protection and 600W lightning-surge protection. 120R terminal resistance of on-board RS485/RS422 interface, enabled by default, can be modified through jumper cap setting
Product type: industrial isolated USB to RS485/422 converter; Communication rate: FT232RNL 300bps~3Mbps; Host interface: USB; Equipment interface: RS485/422

USB interface:
Working level: 5V
Interface type: USB-B interface
Interface protection: 200mA self-recovery fuse, ESD static protection
Transmission distance: about 5 meters
RS485/422 interface:
Interface type: terminal block
Interface pins: A+, B -, PE
Direction control: the hardware automatically determines and controls the data transmission direction
Interface protection: provide 600W lightning-protection, surge and 15KV static electricity protection (onboard 120R balance resistance)
Transmission distance: about 1200 meters (at low speed)
Transmission mode: point-to-many, (up to 32 nodes, and repeaters are recommended for more than 16 nodes)
indicator light:
PWR: power indicator, connected to USB, red light when voltage is detected
TXD: send indicator light, green light when data is sent from USB port
RXD: receiving indicator light, blue light when data is sent back from the device interface
Use environment:
Temperature range: -15 ℃~70 ℃
Humidity range: 5% RH~95% RH
Operating system: Mac, Linux, Android, WinCE, Windows 10/8.1/8/7/XP
Housing: guide-type ABS environment-friendly housing, suitable for 35mm DIN rail
Size: 81.9 x 54 x 32mm
color:Black
Material:ABS+metal

Package Contents:
1 x USB TO RS485/422 converter
1 x USB cable type A male to type B male, about 1.2m
1 x screwdriver

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !