WAVE2 Touch Panel Portable Digital Oscilloscope DIY Kit 2 s Built-in DDS Function X-Y Display CE

Product Update [2022.4.27]

"M" version main board released (PN:109-15800-00M). The changes include:

1.The ciucuits of the breakout boards BOB1 (JYE118, battery charger) and BOB2 (JYE117, power switch) have

been integrated on the main PCB.

2.Added a USB-Uart converter on the main PCB (U20, CH340N). This allows serial data transfer and firmware upgrade throuth the powering USB port.[161 board not included yet]

Wave2 on youtube

https://www.youtube.com/watch?v=P44cYPilRVQ

About WAVE2

WAVE2 is the latest 2- portable oscilloscope on the market, catered to hobbyists, educational institutions and profeionals in the field of electronics and mechatronics. Featuring a bright and easy-to-use color touch screen display with acce to many features only advance oscilloscopes offer such as built-in function and X-Y plotting. With an optional battery, it is portable enough to be taken wherever the jobs that need to be done is. Its an exciting project for any DIY-er, or can be purchased fully aembled for those who are looking to start using it right away. It comes with everything you need out of the box, with a micro-USB cable and two high-quty BNC probes. Enjoy and start creating!

Highlights of WAVE2

No. of s: 2Bandwidth: 0 – 200KHz per Sensitivity range: 5mV/DIV – 20V/DIV (using x1 probe)Maximum input voltage: Vpk (using x1 probe)Maximum real time sampling rate: 1MS/sTime Base range 10us/DIV – 0s/DIVX-Y Display Feature: YesFunction Capability: Built-in 0 – 20KHz (sine) dual DDS function Display Resolution: 320 x 240 Color displayDisplay Size: 2.4″Touch Display Capability: YesBattery powered and portable (battery not included in DIY Kit)

Specification

General2.4” 320x240 color displayTouch panel operationY-X mode availableBuilt-in 2- DDS function Light weight and portableVerticalNumber of : 2Analog Bandwidth: DC – 200KHzSensitivity: 5mV/Div - 20V/Div (with x1 probe)Sensitivity error: < 5%Resolution: 12-bitInput Impedance: 1M ohm / 25pFMaximum Input Voltage: VpkCoupling: DC, ACHorizontalMax Real-time Sampling Rate: 1Msps (per )Timebase: 10us/Div - 0s/DivRecord Length: 1024 pointsTriggerTrigger Modes: Auto, Normal, SingleTrigger Types: Rising/falling edgeTrigger Position: 1/2 of er sizeTrigger Source: Ch1, Ch2, ExternalMaximum external trigger voltage: 15VExternal trigger threshold:Function Number of : 2Waveform type: Sine, Square, Saw-tooth, StairFrequency range: DC – 20KHz (Sine)Amplitude range: 0 – 3V (peak value)Offset: 0V or +3.3VDuty Cycle: 0 – 100%Phase: -360 – 360 degreePower SupplyPowered on 3.7V Li-ion battery or USBCurrent consumption: ~300mA @ 3.7 – 5VInternal batter charger (optional)Automatic power off on batteryBattery running time: Appr. 3hrs (when fully charged)Other FeaturesY-X display modeOn-screen measurement displaySave / recall up to 4 capturesSerial output of captured dataSerial port format: LVTTL, 115200bps, 8N1Built-in 1KHz/3.3V test signal

ant Note

Before beginning to work on the WAVE2 DIY kit, please make sure you have all the tools ready and some experience. Handle iron and all components with care, and keep out of reach from children.

About the Battery

Please note the battery is not included with the WAVE2 DIY kit, however the kit does come with battery wires with matching header. To help you source your own batteries, please source batteries smaller or equal to the following sizes:L x W x H = 62mm x 40mm x 5mm; orL x W x H = 68mm x 31mm x 5mmRecommended battery size:L x W x H = 59mm x 37mm x 5mm / 1200mAh (usually specified as 3759 1200mAh)

Multiple Colors Available

15801K KIT WITH 2 BNC probe15802K KIT WITHOUT 2 BNC probe

More Pictures