Water PH CL2 Chlorine Meter Tester Water Quality Test Pen for Swimming Pool Spa New,Default NO5248

Features:

1. Essential tool to test water for swimming pools, saunas and spa.

2. Wonderful tool for simple measurement of pH and CL2 values of water.

3. No chemical composition, safe to use, fast measurement and accurate

4. Chlorine level safe measurement range: 1.2-1.7ppm

5. PH value level safe measurement range: 7.2-7.8

6. Battery: Use 1 AA battery

Specification:

Type: PH CL2 Tester

Chlorine level safe measurement range: 1.2-1.7ppm

PH value level safe measurement range: 7.2-7.8

Battery: Use 1 AA battery(not included)

Chlorine test-adjustment points:

Before use, please adjust the tester for the swimming pool water or hot spring water to be tested in the following order:

1. Use traditional liquid testing tools to test swimming pool water or hot spring water;

2. Record the chlorine gas reading for backups (1.5PPM);

3. No need to adjust the PH.

Find the adjustment point of the tester:

A. Put an AA 1.5 V battery (positive side up) in the battery slot of the handle.

B. Hold the tester in one hand and the tester stick in the other.

C. Insert the cleaned metal rod into the water to the black position.

D. Use a metal rod to gently stir the water.

E. While keeping the metal rod in the water, turn the knob on the front of the meter toward CL until it can be no longer moved. Then slowly turn back to the right until the pointer points to the traditional

The position of the result measured by the liquid test tool (eg 1.5).

F. Remove the tester rod from the water, being careful not to move the knob. The pointer will slide to the right and stop with a letter between A and E. This letter is the adjustment point.

Note: Before each test of chlorine gas, the meter must be adjusted to the "adjustment point".

Test pH:

The recommended chlorine content for swimming pool water or hot spring water is 7.2 to 7.8

A) Leave the tester stick in the water, and turn the knob toward the pH to make a beeping sound (the battery must be taken out when reading the pH value).

B) Wait for the pH reading after the pointer stops swinging.

C) Gently dry the tester rod, insert it into the slot next to the tester and store it.

Test the chlorine content:

The recommended chlorine content for swimming pool water or hot spring water is 1.2 to 1.7 ppm

A) Set the pointer to the "adjustment point" position.

B) Hold the tester in one hand and the tester rod in the other. Insert the metal rod into the water to the black position. Take a reading after the pointer stops swinging.

C) Leave the tester stick in the water and continue the pH test according to the instructions.

Storage method:

In order to extend the service life of the swimming pool tester and ensure measurement,

1. When not in use, set the knob to the off position (in the direction of PH until it can be no longer moved).

2. Store in a cool, dry place, away from direct sunlight.

3. Never immerse the tester rod in any liquid other than swimming pool water and hot spring water.

4. Regularly check whether the battery is sufficient-the tester uses an "AA" 1.5 V battery

We confidently assure you'll be satisfied with what you get.However, If  there's a chance that you are not satisfied with our goods or something else, please let us know before leaving us a Negative feedback. We will try our best for 100% customer satisfaction. Your 5-Star Positive Feedback is much appreciated to us, and your satisfaction is our greatest motivation to move forward.Welcome to Shop Here! Want more Items? Please come & visit our SHOP.

*Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 5 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).Your satisfaction is our first priority.

*If you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.