Water Flow Control 0.75 L 125PSI Waterproof for Mar

Connect Accumulator Tank to outlet side of water for best results, Accumulator tanks hold a reservoir of air and water down stream from the .
Internal rubber membrane eliminates maintenance and simply fitted to new or existing . life, lower battery drain,reducing noise and providing a more consistent water supply.
Accumulators allow the to reach shut-off pressure more smoothly which reduces the on/off cycle which gives better control of hot water delivery.
Applications:Boat,Marine, RV,Caravan,

Inlet/Outlet Dia:1/2Inch MNPT
Volume:0.75 Liter(25 FL OZ)
Water psi:Max 125 PSI (8.6 BAR)
Pre-charge pressure:10 PSI(0.87 BAR)
Air Fill Vale:standard automotive style tire valve.
Note:
1.Relieve air psi prior to disassembly
2.Do not use to fluids,oline, oil.
3.Do not use in a environment or use where vapors are present.
4.Petrol or fluids with flash point 37°C(98°F), explosion or death may occur.
5.The accumulator tank comes pre-pressurized at 10 PSI. For optimal usage, please set accumulator tank to -3 PSI your water 's cut-in pressure and make it is connected to the outlet of the
6.Do not over pressurize tank. Pressures over 125PSI(8.6BAR) may rupture tank and cause personal injury.
Suitable for:Marine RV Boat
Colour:Black
Material:ABS

Package Contents:
1 * Pressure Tank Water

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.