Warning Triangle Car Safety Auto Sign Road Kit Tripod Triangles Roadside Reflective Signs Approved Dot Reflector

Car Breakdown Warning Triangle Car Tripod Folded Stop Red Reflective Safety Hazard Car Reflective Tripod

[product introduction]When a car is driving on the road, it is inevitable that it needs to stop at the side of the road in an .This thing is useful at this moment. No matter during the day, at night or when the weather is bad, just put it a few meters behind the car to warn the car coming from behind in advance. Because it is reflective, the light warning board is very bright and eye-catching at night and can be seen from a distance.Folding reflective triangle warning signs can be folded together when not in use, and are convenient to carry;when in use, the folding reflective triangle warning signs can be opened and pd behind a car, and are safety articles for driving out.[Instructions for Use]1,When using, take out the faulty car warning sign from the box, hold the bottom with your hand, and open the support on both sides of the bottom. P the opened sign on the ground, pull up the left and right reflectors, and insert the pin on the left reflector into the open groove bottom of the right reflector.2,The reflective surface of the open fault warning sign is pd in the direction of the vehicle behind the faulty vehicle. The vertical angle of the sign is 5' to the left of the vertical plane of the vehicle, and the Common road is pd 30 to 100 meters behind the faulty vehicle. The highway is pd 100 meters behind the faulty car3. When stopping use, withdraw the left and right reflector plates and supporting feet in the re order of the opening, and then put them into the pabox. Pay attention to protect the red reflective surface and fluorescent surface when collecting signs, and avoid scratches. When connecting and disconnecting the left and right reflector plates, push or pull them athe direction of the groove to avoid dam the sign plate.