W3231 Temperature Controller DC12V 24V AC110V 220V Digital Thermostat Thermoregulator for Incubator Box Temperature Meter Test

W3231 Temperature Controller DC12V 24V AC110V 220V Digital Thermostat Thermoregulator for Incubator Box Temperature Meter Test

Temperature controller instruction manual:

Temperature control range: -55°C~120°C/-67°F~ 248°F

Temperature control accuracy: 0.1 °C / 0.1 °F

Display color: red + blue

Working power supply: DC12V DC 24V AC110V~220V

Sensor: NTC 10K 1 Meter (with probe)

Product Size: 79.2mm×41.9mm×26.3mm

Hole Size: 72.1mm×39.2mm

product weight: 52g(12V/24V),59g(110V~220V)

Operation and display panel:

Code

Function

Set range

Default

P0

Heat/Cool

H/C

/

C

P1

Backlash

0.1°~30°/0.1°~54°

0.1°/0.1°

P2

Set upper limit

-55°~120°/-67°~248°

120°/248°

P3

Set lower limit

-55°~120°/-67°~248°

120°/248°

P4

Calibration

-10°~10°/-27°~27°

0°/0°

P5

Delayed start

0-10min

0

P6

Alarm temperature

-55°~120°/-67°~248°

120°/248°

P7

Temperature unit

°/°

°

P8

Data lock

ON/OFF

OFF

Warning code

Code

Reason for error

Solution

HHH

Temperature exceeds alarm temperature

The temperature drops below the alarm temperature and returns to normal.

LLL

No temperature sensor detected

Replacement reconnect temperature sensor

Indicator light

Color

Indicating situation

Red

The red light flashes and the heating mode is delayed.;The red light is always on, heating mode is running.

Blue

Blue light flashes, cooling mode delay starts;

The blue light is always on ,cooling mode is running.

Operation guide

1. Short pre "SET" small digital tube to flash, pre "△" or "▽" to set the target temperature, pre "Standby" on or no operation to save the setting within 3 seconds.

2. Pre and hold "SET" to enter the code setting mode, pre "△" or "▽" to switch the code. After selecting, pre "SET" to enter the code setting. After setting, pre "Standby" on or no operation to save the setting within 3 seconds. .

3. The last parameter setting is saved by default after shutdown.

4, restore the factory settings: pre and hold "SET" to power on.

5. When the module is powered on, it will start directly. After power-on, pre and hold the "standby" on, the module will enter "sleep" or "wake up"; in case of power fai, the module will run automatically after power recovery, no need to start manually.

Product sellins:

1. High-precision temperature control probe, outstanding temperature control performance and accuracy

2. High cost performance, wide temperature control range, simple setting

3. It can be directly installed and used or embedded in the panel of industrial control equment, which is convenient and practical

4. Widely used for cabinet temperature control, poultry incubation, air conditioning system, temperature protection and other occasions

5. It can be controlled by e control, the farthest e control distance can reach 15 meters

The main parameters:

Temperature control range: -55℃~120℃/-67℉~248℉

Temperature control accuracy: 0.1℃/0.1℉

Display color: red + blue

Power supply: DC12V DC24V AC110-220V optional

Sensor: NTC 10K 1 meter (including probe)

Product size: 79.2mm×41.9mm×26.3mm

Hole size: 72.1mm×39.2mm

e control distance: 15 meters (the quality of the infrared receiver itself, obstacles in the middle and other factors will affect the e control distance)

e control packaging: Contains 2 LR1130 on batteries, with insulation sheet (to avoid power consumption when not in use).

e control settings:

C/F: Fahrenheit/Celsius switch

ENT: Enter key (short pre "ENT" to enter code setting mode, short pre "SET" after selection to enter code setting, pre up and down keys to set parameters, pre "ENT" key after setting or save the setting without operation within 3 seconds.

Set: Short pre the "SET" small digital tube flashes, pre "+" or "-" to set the target temperature, pre the "SET" key or no operation within 3 seconds to save the setting.

12V/24V list:

Thermostat X1

e control X1

110-220V list:

Thermostat X1

e control X1

Power module X1

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.