VONETS 2.4GHz WiFi Bridge Ethernet Wireless Repeater Router Hotspot Signal Extender for DVR Network Printer Devices VAP11G-500S

VONETS VAP11G-500S is an Industrial Mini 2.4G WiFi Bridge Ethernet Wireless Repeater with WiFi Router functions, it can achieve WiFi to Wired or Wired to WiFi function (WiFi to Ethernet or Ethernet to WiFi convert).




Good Partner for Industrial, Factory, Company, Network Printer, Monitoring, DVR, IP camera, Medical devices, IoT devices, Sensor, Video transmission, POS Cash Register, PS3, Robot, Doll Machine, Electronic Scales, DVR, NVR, PLC and more network devices and applications.




1. Industrial Mini 2.4GHz WiFi bridge/Wireless Repeater/WiFi Router ;
2. Support wide voltage DC5V-24V power supply, two-stage automatic overvoltage protection (Protection voltage upper limit 27V);
3. The output power of the power supply is not less than 10W (typical power supply 5V/2A);
4. Power supply: ≤2.5W;
5. WiFi transmission rate : 2.4GHz 300Mbps (theoretical value);

6. RF Power: 20dBm/23dBm optional;
7. Two 10/100Mbps adaptive Ethernet ports, and provide option accessories for expanding Ethernet port (one expansion);
8. Internal antenna, can be extended by extension cable (optional);
9. Standard accessories industrial track fixing kit and Industrial power supply DC connector;
10. WiFi hotspot memory, maximum memory?100 hotspots;

11. Support connecting more than 20pcs WiFi terminals at the same time;

12. Adopt VDNS virtual domain configuration technology to solve the user's trouble of configuration;


13. Support manually close SSID broadcast, WiFi hardware;
14. Support SSA? signal strength detection reporting function to realize WiFi mobile positioning;
15. Support configuration parameter import and export function to facilitate batch configuration of engineering projects;
16. Support IP layer transparent transmission and MAC layer transparent transmission two bridge modes to meet various bridge applications:
IP layer transparent transmission (factory default), transparent transmission of IP layer data, can meet most of the bridge applications;
MAC layer transparent transmission of all data above the MAC layer (link layer) and the MAC layer, including IP layer data; MAC transparent transmission can solve some special applications for MAC layer encryption, such as AP managed by AC,?GoPro camera, Cisco AP, Hikvision monitoring. system, etc.
17. Adopt temperature compensated auto frequency control technology (TAFC), WiFi signal is more stable and not easy to drop
18. Working environment temperature: -20 °C to 50°C;




Basic Functions:

1)???Router mode, support WiFi WAN access and WAN/LAN exchange;
2)???Transparent bridge (IP layer transparent, MAC layer transparent);
3)???SSID broadcast exchange, WiFi hardware exchange;
4)???WiFi mode option: 802.11B/G/N;
5)???WiFi hotspot automatic reconnection, two hotspot matching methods: Full match authentication mode, SSID and password authentication mode;
6)???WiFi hotspot memory, maximum memory 100 hotspots;
7)???SSA signal strength detection and reporting function ;
8)???Hotspot connection parameter import and export function;



Application Methods:

WiFi Router;
WiFi Repeater (WiFi signal repeater), can extend WiFi transmission distance;
WiFi Bridge: IP layer transparent transmission, MAC layer transparent transmission;
WiFi access point (AP);


External interface:

(1) USB/DC power supply cable; (2) 10/100M Adaptive Ethernet cable; (3) 10/100M Adaptive Ethernet port (A dedicated Ethernet port expander can be used)

Reset button: Long press the reset button for 5 seconds, then release it, wait for the indicator light to flash slowly ->stop ->finally resume flashing, indicating that the reset is completed. (During operation, the product can not be powered down, otherwise it may cause damage to the product.)




LED Status Indicator:

Ethernet port (cable) Status Light (Yellow);

WiFi Connection Status Light (Green);


Packages:?VAP11G-500S*1 + Fixing kit*1 + Industrial power supply DC connector*1 + User manual*1 + Retail box*1


Tips:

1. After configuration, if this device doesn't work with your devices or your application is AC managed AP, GoPro camera, Cisco AP, Hikvision surveillance system, please change the setting of "Transmission mode" to "MAC layer transparent";

2. If you want to use Huawei or iPhone as the source hotspot for WiFi bridge, please select "SSID and password match" in the "Advanced Setting" under the upper-level hotspot password during configuration.

3. If the device disconnects frequently or other problems during use, you can upgrade the software online and may be able to solve the problem!





?