Vc100 -100 Digital Backlight LCD Film Thickness Meter

Car Tester Operation Instructions. 1.Measurement preparation. Open battery cover and load two CR2032 button batteries(Not Includes); Pay attention to positive and negative pole. 2.Turn on/off. Leave the instrument hang in the air and press""button to turn it on,LCD full screen display,which means it enters the measurement state.Then long press""button to turn it off. Note:Keep it from the substrate when starting up.
3.Measurement. Press the probe onto the coated metal substrate lightly, that the instrument should be perpendicular to the surface of the object that being measured. Note:When the probe pressed on the substrate,the LCD will display"---",then you must wait unit the measurement value displayed the LCD,then remove it from the substrate.If removing before a value is displayed,it will display the last measured value.
4.Unit selection. After start-up,short press"UNIT"button to select measurement unit mm or . 5.LCD backlight. After start-up,long press"UNIT"button to turn on/off the backlight.
6.Clear screen data. After start-up,press""button to clear the data displayed on LCD screen.
7.Power off automatically. The instrument will power off automatically if two minutes no operation after start-up.And it will power off automatically as well after five minutes start-up,even when you are operating it. VC100 can Test thickness , can help you test whether the thickness of the is normal when you buy a used car and whether it has been reedindustries.

Car Tester Introduction The Car Check meter is a portable obd2 obdii coating thickness ,which can meansure the thickness of non-metallic coating(such as ,film,etc.) On netal substrate quickly,nondestructively,and accuratly. The takes the precision integrated probe, and uses principles of electro-ic induction and current effect, which automatically detects the attribute of substrates.
The is designed for non-destructively measuring the thickness of coating and ing. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, industry, commodity inspection area, and also to work steadily in the , workshop and outdoor
Color: black
Material: plastic
Car TesterButton Functions
1.Botton"":Turn on/off,clear.
2.Botton"UNIT":Unit Switch,backlight
-100 Technical Specifications
Model Number -100
Measurement Range 0~1.80mm/0~71.0mil
Accuracy ±2%
Resolution 0.05mm/2mil
Measurement error 0.1mm
Units um / mils
Screen Digital LCD Backlight
Power Two 3V CR2032 batteries
Size 38.0 x 87.0 x 22.0mm
Weight 63.98g(without batteries)

Package Contents:
1 x Film Thickness Meter(Tag random Do not accept designation)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.