UT2H UT4F 2023 ADT Super Thin Soft Flexible Flat USB 2.0 Type C~C Extension Cable High Speed Shielded USB 2.0 Charging Data USB~C Cord

ADT factory direct s, excellent product performance, super good reputation products, 100% full inspection power-on test deliveryBrand: ADT-LINKProduct model: UST2 series productsProduct name: USB 2.0 Type-C to Type-C charging data cableWire length: 0.03m-10m (support length customization)Compatibility: USB-C to USB-CSpeed : USB 2.0 standard 0.48G/bps high speedCurrent capacity: 6A (measured 10cm supports 6A, 1 meter supports 3A)Product application: devices such as single-chip development boards are connected to industrial cameras, hard disk boxes and other data nsmiion or charging purposes through Type-C, and support CC1 CC2 signal direct connectionPurchase restrictions: This product is designed to be connected to built-in USB devices. It is not suitable for ordinary external use. It is limited to the designated purchase by the product engineer, and individual buyers are not allowed to p an order. The structure of this product is fragile and fragile, not suitable for civilian use, and it is not easy to use for general purposes. Please consider it carefully before placing an order.Procurement Tip: Be sure to buy 1~2 samples to test and verify that they are correct before purchasing in bulk.

USB-A to Type-CCharger DataCable,UST2 Series Products

Product Name

Model

Sight C male to sight C maleT1F-T1FUSB2.0Sight C male to angled C maleT1F-T2HUSB2.0Sight C male to sight C femaleT1F-T4FUSB2.0Angled C male to angled C maleT2H-T2HUSB2.0Angled C male to sight C femaleT2H-T4FUSB2.0

Product Image:Type 1: Male To MaleType 2: Male To FemaleWire length description:The length of the wire in our shop refers to the part of the visible wire, excluding the and the connector's Lengths. If the and the connector are included, add about 4cm. Refer to the figure below for the line length dimension.

Product advantages:1. Wire advantages, use ADT's s-designed wire, the wire is thin, thin and flat, and the core wire is shielded with aluminum foil for anti-interference2. Line length advantage, fro cm to 10 meters can be customized3. Multi-core wire design, support high current stability4. The adopts high-frequency and low-resistance high-quality materials, the workmanship is precise, the uses high TG material, the thickne of the copper material is thickened to 1oz, the power circuit is strengthened, and the multi-core wire design is strengthened to use 2 VBUS and 4 grounding. In this way, there are 6 power cores, the nsmiion current is stronger, and the high current 6A is supported.

Summary of technical iues:

Can wires and connectors be split?

No, in order to purify the signal nsmiion and avoid the accident of wire falling off, our wire and connectors is and protected by the heat shrinkable tube sleeve, so the product can not be separated.

Cable thickne? Can it be bent?

The thickne of the wire is 1.3mm, Width 7.7mm, and it can be bent and folded without affecting the use.

Is there any EMI shieldingfor Cable?

Yes, there is ametal shield. The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electroic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electroic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.