USB 5VDC748V EWeLink Smart Wifi Switch Universal Relay Mod

Fool-type wifi control module, no need to , only need to download an APP, link WIFI to control the built-in cloud. As long as the module is connected to WIFI, the mobile phone can be controlled anywhere in the country.
Default inching function: press the phone to open the relay, immediately disconnect the pull (default 1 second), and has a time-sharing function
When the light is on, press the jog lock button to -lock. Press the open relay to pull in, press the relay to cut off.
Working mode: This product is a wireless switch supports momentary(inching) /-locking/interlock work modes. Users can the device to the APP eWeLink in order to remotely control connected or power circuits. Note:The relays are switches without output, the power supply input (AC/DC) just for the PCBA.Tap the work mode setting button manually, the product can change the working mode.
When in inching mode, you can have two wiring ways to select: -Turn on 1s and then auto-off -Turn off 1s and then auto-on.
When in -locking mode, you can remotely turn on/off connected devices immediately.
When in interlock mode(only 2-gang and 4-gang supports), you can remote control AC/DC motors.
The product enables remote control of through the mobile application eWeLink, available on both Android and for iOS.
Working voltage: USB 5V/DC7-48V
With signal indicator light and relay pull-in indicator light
Power: Less than 1W
Quiescent current: 80mA
Maximum current: Less than 10A
Maximum voltage: Less than 250
10A relay mode
The life of the relay has exceeded 100,000 Insulation resistance: 100
Maximum pulling time: 15m
Maximum release time: 5m
Working temperature: -40℃~70℃
Working humidity: 40%~80%RH
type: Smart Wifi Switch
color:Green+black+blue
Material:PCB+electronic components Package Contents:
1 x Smart Wifi Switch Only the above package content, other products are not included.
Note: Light reflection and different displays may the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.