Universal DIY 433 Mhz 1CH RF Relay Receiver Wireless e Control Switch Micro Module LED Light e Controller

Feature:

range working voltage.

Ul low power, High sensitive response.

Application: Suitable for LED light, LED light string, mas tree light string, light control switch and so on.

Light Switch Receiver Module only, other accessories demo in the picture is not included!




Specifications:



Item Type: Light Switch Receiver Module

Working Voltage: DC3.6-24V

Max Load: 2A

Static Current: 3.6-5.5mA

Working Frequency: 433MHz

Receiving Sensitivity: greater than and equal to -107dBm

Input: DC3.6V-24V

Output: DC3.6V-24V

Modulation System: ASK

Support code format: 1527 learning code

Number of stored e controllers: less than and equal to 10

Working mode: inching, s-locking, interlo

Learning mode: for KEY Learning

Working temperature: -20-80 Celsius/-4-176Fahrenheit

Material: ABS+Metal

Size: Length: 11.5cm/4.5in

Color: As shown

Quantity: 1 Pc



Instruction:

About Working mode:

Momentary: Push the e on , the relay connects, release the e on , the relay dis-connects.

Tole: Push once the e on, the relay connects , push twice the e on , the relay dis-connects.

Latching: Push the e on A, the relay connects, push the e on B, the relay dis-connect.

Steps:

Clear Code: Press the learning on on the module 8 times continuously, and the light fes seven times and then goes out.

Momentary Mode：Press Module learning on 1 for , the indicator light is for always on, then press the e control on, the indicator light fes 3 times and then turns off , then the learning is successful; If the code is not successful , the indicator lights out of the learning state after 15 seconds.

Tole Mode： Press the Module Learning on 2 times, the indicator light for always turns on; then press the e control on, the indicator lights flicker three times and then off, then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.

Latching Mode：Press the Module Learning on 3 times, the indicator light for always turns on; and then press the ons on the e control , the indicator lights flicker three times and then off,then the learning is successful; if the code has not been successful, the indicator lamp goes out of the study state after 15 seconds.




Note:



No retail package.

nsition: 1cm=10mm=0.39inch

Please allow 1-3mm error due to manual measurement. pls e sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!




Package Includes:



1 x Light Switch Receiver Module

window.adminAccountId=247858919;