Universal Auto Non-Slip Gas Brake Pedal Cover, 2Pcs, Car Accessories

Features:*100% brand new and high quality.*Creative and fashionable design.*Suitable for most car types.* Easy installation, no drilling required and to reduce fatigue while driving.Features* Red color*Material: Aluminum alloy (it is thin aluminum)*Sizes: gas-approx. 15cm x 7cm, brake and clutch - approx. 9cm x 6.5cm* Thickness: approx. 0.5cmInstall:1. Install straps with screws and nuts on each pedal. Then place the pedal in the correct position to bend the straps around the original pedal.2. Fold the straps around the original pedals. Use the sand cloths from the pliers to secure the straps really tight so they can't move anywhere.3. Check if the straps can be bent around the pedals.Installation size and range:1. Two small plates of 9cm x 6.6cm (length and width), four screw position width of about 4.5cm, that is, the width less than 4.5cm, the length less than 9cm of the original car pedal can be installed;2. The board is about 15.2cm in length and 8.2cm in width, and the width of the four screws is about 4.5cm, that is, pedals less than 4.5cm in width and 15cm in length can be installed;3. The installation diagram is attached on the back of the package. The fixing method is that the screw and 7-clip clip are attached to the original car pedal for fixing. There is no need to drill holes, so installation is convenient.4. Generally, cars with automatic transmission are suitable. Of course, some cars are not suitable. Please measure the pedal size of your car before purchasing.Package Included:*2 x Universal Auto Anti-Slip Gas Brake Pedal CoverNote:1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.