Universal 433MHz learning remote control wireless remote control switch button DC 12v 1Ch relay receiver module RF transmitter

Relay Receiver Board Parameter

★Working voltage : DC 12V

★Quiescent Current : 97dbm

★Support encoding : 1527 Learning

★RF Operating mode : ASK superheterodyne wireless reception

★Remote operating mode : Momentary Mode / Toggle Mode / Latched Mode / Time Delay Mode (5s ,10s ,15s )

★Remote control battery:3 V CR2016 button batteries

Remote programming

Working mode:

1. Inching mode: press the remote controltherelaywill connect, and thenrelease the remote controlto disconnect the relay;

2. Self-locking mode: press the remote controltherelaywill connect, and then press the remote controlagainto disconnect the relay;

3. Interlock mode: press the remote control key A toconnect the relay, and press the remote control key B to disconnect relay.

4. Delay mode: press the remote controltherelaywill connect, release the remote control and start timing. After 5S, 10S and 15S (3 gears), the relay will be automatically closed.

Learning Methods:

1. Inching learning method:

Press the pairing button on the control panel once, and the LED indicator will f once. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

2. Self-locking learning method:

Press the pairing button on the control paneltwice, and the LED indicator will ftwice. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

3. Mutual lock learning method:

Press the pairing button on the control panelthree times, and the LED indicator will fthree times. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

4.5S delay learning method:

Press the pairing button on the control panel four times, and the LED indicator will ffour times. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

5. 10S delay learning method:

Press the pairing button on the control panel five times, and the LED indicator will ffive times. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

6. 15S delay learning method:

Press the pairing button on the control panel six times, and the LED indicator will fsix times. After the LED indicatorlit, press the buttonyou need to pairing on the remote control, the LED indicator on the control panel will f for 3 times which means the pairing succeed.

Clearingmethod:

Press the pairing button on the control panel eight times,then it will automatically clear all thelearnedremote controls.After clearing, the remote control previously learnedcan no er beused.

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.