UCDS PRO+ For FOCOM Full Activate License V1.27.001 Professional Car ECU

Newest V1.27.001 Version for FORD UCDS PRO+ Supports for Ford Cars With 35 Tokens Full License UCDS pro UCDS Full Activated

Note：The programming function can only be used 35 times. If you use up the number of times, you need to buy a new cable,or you can only use diagnostic functions

Supported Vehicles:

For Fox MK2 (2004-2014) C307

New For Focus MK3 (2012-2017) C346

For Wing tiger 15 wing tiger 17 wing tiger

For Mondeo wins S-Max Galay

New For Mondeo 13 (Mondeo5)

For Explorer

For Transit

For Carnival B-Max

For Wing Bo

And other new model

Descrtion：

The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual  UCDS-programm.

The software interface of the UCDS interface has main window’s mode. You need to select the type of the vehicle or select the service mode for adapter`s firmware update or other service functions.

UCDS currently works with the following platforms: For Focus II 2004-2011; For Focus III 2011, 2015 ; For Kuga I, For Kuga II; For C-MAX; For S-MAX; For MONDEO IV; For Mondeo 2015 ; For Galaxy ; For Tansit; For Fiesta 2008, 20015 etc..

New Released Diagnostic Adapter with neweest software V1.27.001 can replace For Ford Vehicle Communicate Module 2, just one difference, UCDS cannot key programming, but UCDS (Universal CAN Diagnostic System) for Ford can support Mileage Correction and it is full function type.

Please Note ant:

Please Disconnect internet when Run software.

Please don't update online, otherwise it will be locked.

MUST Click "No" when meage show out to ask you update.

Highlights to get UCDS PRO+:

UCDS Software: V1.27.001

UCDS full license adapter: full mode activated, acce to existing sections of the software, such as: VBF Loader, Update Wizard and Direct Config.

With 35 tokens: token only need for mileage programming & ECU ch tuning function (When use up tokens, send back to add token, Need pay extra cost.)

UCDS support Dasard meters correction

For Ford cars from 2004 to 2017 Year.

Full Mode Activated

Best replacement for Ford Vehicle Communicate Module 2

Functions:

1. Read the fault code

2. Clear trouble code

3. Read the data stream

4. Data recording

5. Module reset

6. Module Installation

7. Re-program the ECU TCM BCM and so on

8. Clear the aig (RCM) collision data

9. Read, backup, edit, and erase AsBuilt file

10. Read, backup, edit, and erase the underlying DirectConfig configuration file

11. Support power to enhance the brush to write, such as Mondeo 2.0T 200HP brush 240HP, 12 Fox 85HP brush 105HP, 150HP brush 163HP

12. Support VBF file directly to write

13. Support BIN file directly to write

14. Support online update vehicle entire module (Update Wizard)

15. Support For Fox MK2, 12 for Fox MK3, for winning, for S-Max and other models Dasard meter clear, brush to write

For UCDS-Ford New Features:

The dasard can be displayed from English to Chinese; the new for Mondeo power can be upgraded from low to high; the navigation OPS of Escape can be flashed; the SCT program can be input; the SCT device (token limited) can be replaced.

UCDS allows the user to:

– Diagnose the majority of car parts and components that are connected to a central electrical module (GEM, BCMii) through the data bus (CAN);

– Receive data embedded in the car components and modules, including their part number, version, calibration, serial number;

– Make the neceary changes to the central configuration of the car, and change the configuration of the modules and components if neceary;

– Update the calibration (firmware) of the modules and components of the vehicle, including the engine (the so-called ch tuning);

– Perform regular language adaptation of the audio modules manufactured by for SONY (Ruian language only);

– Other…

Package List:

1 x UCDS PRO

1 x CD Software

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.