TYPE-C nanoDLA Logic Analyzer ARM FPGA Debugging Tool Protocol Analysis 24MHz

Introduction

TYPE-C nanoDLA is a hardware and software open source logic analyzer developed and produced by Muse Lab. It is exquisite and compact in appearance with rich functions. It supports up to 24Mhz sampling rate and more than 100 kinds of protocol analysis. 8 channels can sample data simultaneously. Efficiency could be greatly improved in scenarios such as problem location, complex syst with multle components, timing analysis and performance analysis.

Features&Specification

● Open source hardware , provide hardware schematic● Open source software :1.provide source code to compile firmware by yourself2.use open source PulseView as PC software to analyze sampling data, which is rich in functions and easy to use, supports more than 100 kinds of protocol analysis● Support up to 24Mhz sampling rate and 8 channels can sample data simultaneously● Support input logic level [-0.5v,5.25v]. low level is [-0.5v, 0.8v], high level is[2v, 5.25v]● Support operating system like Windows, Linux, Mac, Android● Small Size: 3.9cm * 2.0cm

Software Installation

●Install PulseView Download installation package from https://github.com/wuxx/nanoDLA/tree/master/software and double click the installation package to install

●Install Driver1.Plug nanoDLA to PC USB port. nanoDLA will be recognized as other device in device manager

2.Search “Zadig” in the the start menu of PC, then open it

3.Click “Options” and toggle on “List All Devices”. Choose device named “fx2lafw”, whose USB ID is 1D50:608C and select “WinUSB” in the driver blanket. Then click “Install Driver” on.

When the driver is installed succefully, there would be a alert as below,

4.After finishing installation of driver, nanoDLA would be recognized as a USB device in device manager

How to Use

1.Plug nanoDLA to PC USB port and open PulseView software

2.Configure channels and sampling rate, the click “Run” on in the top left corner to sample data

3.After signals are sampled, you can use to decode them. Let’s take UART sampled data as an example. Click the menu and select UART protocol, then configure UART parameters such as channels, baud rate, data bits, parity type. Afterwards, the data sampled will be decoded.

Doentation

● User manual: https://github.com/wuxx/nanoDLA/blob/master/README.md● Software:https://github.com/wuxx/nanoDLA/tree/master/software

Shping List

● Kit 1:  nanoDLA Logic Analyzer * 1● Kit 2:  nanoDLA Logic Analyzer * 1 + Test Hook * 10 ● Kit 3:  nanoDLA Logic Analyzer * 1 + 1 meter TYPE-C Cable * 1● Kit 4:  nanoDLA Logic Analyzer * 1 + Test Hook*10 + 1 meter TYPE-C Cable * 1

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.