Type-C LCD Display Battery Capacity MAh MWh Lithium Battery Dial Battery Power Module 18650 Battery

Type-C LCD Display Battery Capacity MAh MWh Lithium Battery Dial Battery Power Module 18650 Battery

The product display defaults to Chinese if you need to switch

Watch the video below

If you need see instruction , may you see the following link

https://www.banber.com/banber/630d8a91f2d1141ad456b7d3.html

1: Specially used to measure 18650 battery capacity

2: The integration of charging and discharging eliminates the tedious operation of disembling and embling the battery to rep the charging and discharging of the device

3: The size of the discharge current can be switched and it is convenient to use

4: Small size, easy to carry

5: stable performance

This product is a 18650 battery capacity , which is specially used to measure the capacity of 18650 batteries. The 1.77-inch TFT display can simultaneously display information such as battery internal resistance, capacity, voltage, current, power, etc.; The tedious operation of charging and discharging equipment; preset three modes of automatic, charging and discharging, after selecting the corresponding mode, start the equipment, and the program will run automatically; the size of the discharge current can be switched for convenience.

technical

①Install the power supply 18650 battery and the 18650 battery to be d;

②Use the Type-C data cable to connect the Type-C power supply port to the 5V power supply. The external power supply is used to charge the battery in the CHG state. If you only need to discharge the DSG, you can leave it unconnected;

③Select the mode, the default is AUTO automatic mode;

④Clithe Start on to start the program;

⑤Wait for the process to end and the status indication to stop.

About power-off storage:

This product has no power-off storage function. Shutting down, restarting, and switching the working mode can cause the accumulated data to be cleared as shown below.

01

It can be used well

The working mode corresponds to the state change

Product name: 18650 battery capacity internal resistance charging and discharging integrated version

Working voltage: DC5V

voltage: ≤DC5V

Capacity measurement range: 0~99999mAh

Energy measurement range: 0~99999mWh

Battery internal resistance measurement: support, measurement error is about 10%

Display real-time voltage: support

Display real-time current: support

Display real-time power: support

Log run time: support

Working mode indication: support

Current Status Indication: Supported

Simultaneous discharge: not supported simultaneous discharge of 18650 battery Test① and external power supply Test② is not supported

Discharge load: 10W 8ΩJ cement resistance × 2

Discharge current selection: ≈0.5A or ≈1A

Charging interface: Type-C

External discharge interface: Type-C

Preset discharge stop voltage: 3V not adjustable

Preset full stop voltage: 4.2V not adjustable

Data storage: The measurement data is not saved, and the accumulated data is automatically cleared when the power is turned off or when the working mode is switched.

Product size: 108×85×24mm

Product weight: 80g net weight

Charge and discharge time reference:

AUTO automatic mode: The battery discharged in advance is charged ~ the default current is about 1A to discharge 1704mAh ~ it is fully charged again to trier the program to stop, which takes 437 minutes and 23 seconds.

DSG discharge mode: When the battery is fully charged, it uses a current of about 1A to discharge 1681mAh, which takes 118 minutes and 55 seconds.

CHG Charging Mode: The capacity and energy are not measured during charging, only the time is recorded, which takes 164 minutes and 51 seconds

Package List :

1*18650 battery capacity internal resistance automatic charging and discharging module