Type-C LCD 4/1 Display Battery Capacity MAh Lithium Dial Battery Module For 18650 Battery

4 Display Battery Capacity

Features:

1.The product supports four- capacity and internal resistance measurement
2.Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode
3.Each is independent of each other, set separately, operates independently, and does not interfere with each other
4.18650 battery holder uses compact battery holder, suitable for flat-head battery measurement
5.Active cooling of fan supports overheating protection
6.Using DC two-wire method to measure internal resistance
Note: lithium iron phosphate battery charging is not supported

s:

Working voltage: DC5V
Applicable battery: suitable for all batteries that meet the requirements of stopping discharge voltage of 2.5~3.5V and starting from 2.8V to 4.2V
Power supply interface: Two-way Type-C power supply interface（Excluding power supply and power cord）
System language: English/Chinese can be switched
Test quantity: 4-way charging and discharging measurement
Internal resistance measurement: support, use DC two-wire method to test internal resistance
Charging function: support, automatic cut-off charging when fully charged lithium iron phosphate battery charging is not supported
Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable
Automatic charging and discharging: supported. The battery is fully charged at the end of automatic mode
Cyclic charging and discharging: supported, 1~9 cycles adjustable only supported in automatic mode
Status prompt: Supported
Cooling mode: fan active cooling
Overheat protection: support
Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable gears
Discharge current: the maximum current is about 1A, which is not adjustable, and does not support independent nsformation
Charging voltage: controlled by a special battery charging chip, with a maximum charge of about 1A and a full charge voltage of 4.2V
Power-off saving: only save the set s, not the measurement data
Product size: 150 × one hundred and three × 36mm
Package size: 182 × one hundred and twelve × 50mm
Data link: https://www.banber.com/gather/6374be9b2ee0e200077ec155

Package include:
18650 battery capacity internal resistance X1
Crowbar X1

18650 single

The product supports single- capacity and internal resistance measurement
Support separate charge and discharge, support up to 9 charge and discharge cycles in automatic mode
There are 11 levels of adjustable discharge stop voltage
Use DC two-wire method to test internal resistance, Chinese and English can be switched
The maximum charge and discharge current is about 1A

Notice:
Some components wilenerate local high temperature during charging and discharging during use. Please ensure that the use environment is open and uncovered. It is better to increase the heat dissipation of the fan.
In order to ensure that the battery clip is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement! ! !
Does not support lithium iron phosphate battery charging

Basic s

Working power supply: DC5V power supply or 18650 battery need to bring your own

Applicable battery: meet the discharge stop voltage of 2.5 ~ 3.5V, 2.8V starting ~ 4.2V fully charged battery is applicable
Power supply interface: Type-C interface, s-prepared power supply line C port mobile phone line
System language: Chinese default, English
Test quantity: 1 way charging and discharging measurement only the right battery position
Internal resistance measurement: support, use DC two-wire method to test internal resistance
Charging function: support, automatically cut off charging when fully charged does not support lithium iron phosphate battery charging
Discharge function: support, automatically stop when the condition is reached, the discharge current is not adjustable
Automatic charging and discharging: support, the battery is fully charged when the automatic mode ends
Cycle charge and discharge: support, adjustable from 1 to 9 cycles only supported by automatic mode
Status prompt: support
Discharge stop voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, a total of 11 levels adjustable
Discharge current: two s, the maximum current is about 1A, not adjustable, does not support independent nsformation
Charging voltage: controlled by a dedicated battery charging chip, the maximum charge is about 1A, and the full charge voltage is 4.2V
Power-off save: only save the setting s, not save the metering data
Product weight: 80g net weight 120g including pack
Product size: 110×88×30mm
Package size: 153×100×42mm
Data link: https://www.banber.com/gather/6365d57f9f8cae0007718211.html

Package list:
18650 battery capacity internal resistance X1